Update Supported_Rowers.md

This commit is contained in:
Jaap van Ekris 2024-07-02 10:19:14 +02:00 committed by GitHub
parent dacae41c9a
commit 7d71a04c26
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
1 changed files with 3 additions and 3 deletions

View File

@ -1,14 +1,14 @@
# Known rowers and their support status
Open Rowing Monitor works with a very wide range of rowing machines. It is currently developed and tested with a Sportstech WRX700 water-rower and a Concept2 air-rower. In the past, it was also tested extensively on a NordicTrack RX-800 hybrid air/magnetic rower. But it should run fine with any rowing machine that uses some kind of damping mechanism, as long as you can add something to measure the speed of the flywheel. It has shown to work well with DIY rowing machines like the [Openergo](https://openergo.webs.com/), providing the construction is decent.
Open Rowing Monitor works with a very wide range of rowing machines. It is currently developed and tested with a Sportstech WRX700 water-rower and a Concept2 air-rower. In the past, it was also tested extensively on a NordicTrack RX-800 hybrid air/magnetic rower. But it should run fine with any rowing machine that uses some kind of damping mechanism, as long as you can add something to measure the speed of the flywheel. It has shown to work well with DIY rowing machines like the [Openergo](https://openergo.webs.com/), providing the construction is decent. With some tricks, we can even make it work with machines that can't measure the impellor directly, but you will fall back to the "Static distance" approach.
The following rowers are known to work, or are even actively supported:
| Brand | Type | Rower type | Measurement type | HW Modification needed | Support status | Rower profile | Basic Metrics | Advanced Metrics | Limitations | Remarks |
| ----- | ---- | ---- | ---- | ---- | ---- | ---- | ---- | ---- | ---- | ---------------- |
| Abilica | Winrower 2.0 | Air rower | Handle drive wheel | No | Known to work | - | Yes | No | Static distance | see [this discussion](https://github.com/laberning/openrowingmonitor/discussions/48) |
| Concept 2 | Model B, C | Air rower | Flywheel | Modification to electrical signal | In development | - | - | - | - | See [this](https://github.com/laberning/openrowingmonitor/issues/77), [this](https://github.com/laberning/openrowingmonitor/discussions/38) and [this](https://github.com/laberning/openrowingmonitor/discussions/151) discussion|
| | Model D, E | Air rower | Flywheel | Modification to electrical signal | Active support | Concept2_RowErg | Yes | Yes | None | [Concept 2 Model D, Model E and RowErg setup](hardware_setup_Concept2_RowErg.md) |
| Concept 2 | Model B, C | Air rower | Flywheel | [Modification to electrical signal](https://oshwlab.com/jpbpcb/rower2) | Active support | Concept2_Model_C | Yes | Yes | None | See [this](https://github.com/laberning/openrowingmonitor/issues/77), [this](https://github.com/laberning/openrowingmonitor/discussions/38) and [this](https://github.com/laberning/openrowingmonitor/discussions/151) [this](https://github.com/laberning/openrowingmonitor/discussions/157)discussions|
| | Model D, E | Air rower | Flywheel | [Modification to electrical signal](hardware_setup_Concept2_RowErg.md) | Active support | Concept2_RowErg | Yes | Yes | None | [Concept 2 Model D, Model E and RowErg setup](hardware_setup_Concept2_RowErg.md) |
| | RowErg | Air rower | Flywheel | Modification to electrical signal | Active support | Concept2_RowErg | Yes | Yes | None | [Concept 2 Model D, Model E and RowErg setup](hardware_setup_Concept2_RowErg.md) |
| Decathlon | Rower 120 | Physical friction | Flywheel | Adding sensor and adding magnets to the flywheel | In development | - | - | - | - | see [this discussion](https://github.com/laberning/openrowingmonitor/issues/110) |
| DKN | R-320 | Air Rower | Flywheel | No | Full support | DKN_R320 | Yes | No | Static drag | - |