cleanup leftovers

extra/rpi3/README

@@ -1 +0,0 @@
-This is the required firmware for Raspberry Pi 3's onboard Bluetooth and WiFi.

extra/rpi3/brcmfmac43430-sdio.txt

@@ -1,66 +0,0 @@
-# NVRAM file for BCM943430WLPTH
-# 2.4 GHz, 20 MHz BW mode
-
-# The following parameter values are just placeholders, need to be updated.
-manfid=0x2d0
-prodid=0x0727
-vendid=0x14e4
-devid=0x43e2
-boardtype=0x0727
-boardrev=0x1101
-boardnum=22
-macaddr=00:90:4c:c5:12:38
-sromrev=11
-boardflags=0x00404201
-boardflags3=0x08000000
-xtalfreq=37400
-nocrc=1
-ag0=255
-aa2g=1
-ccode=ALL
-
-pa0itssit=0x20
-extpagain2g=0
-#PA parameters for 2.4GHz, measured at CHIP OUTPUT
-pa2ga0=-168,7161,-820
-AvVmid_c0=0x0,0xc8
-cckpwroffset0=5
-
-# PPR params
-maxp2ga0=84
-txpwrbckof=6
-cckbw202gpo=0
-legofdmbw202gpo=0x66111111
-mcsbw202gpo=0x77711111
-propbw202gpo=0xdd
-
-# OFDM IIR :
-ofdmdigfilttype=18
-ofdmdigfilttypebe=18
-# PAPD mode:
-papdmode=1
-papdvalidtest=1
-pacalidx2g=42
-papdepsoffset=-22
-papdendidx=58
-
-# LTECX flags
-ltecxmux=0
-ltecxpadnum=0x0102
-ltecxfnsel=0x44
-ltecxgcigpio=0x01
-
-il0macaddr=00:90:4c:c5:12:38
-wl0id=0x431b
-
-deadman_to=0xffffffff
-# muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG
-muxenab=0x1
-# CLDO PWM voltage settings - 0x4 - 1.1 volt
-#cldo_pwm=0x4
-
-#VCO freq 326.4MHz
-spurconfig=0x3 
-
-edonthd20l=-75
-edoffthd20ul=-80

extra/zram

@@ -1,45 +0,0 @@
-#!/bin/sh
-### BEGIN INIT INFO
-# Provides:          zram
-# Required-Start:    $local_fs
-# Required-Stop:     $local_fs
-# Default-Start:     S
-# Default-Stop:      0 1 6
-# Short-Description: Use compressed RAM as in-memory swap
-# Description:       Use compressed RAM as in-memory swap
-### END INIT INFO
-
-# Author: Antonio Galea <antonio.galea@gmail.com>
-# Thanks to Przemysław Tomczyk for suggesting swapoff parallelization
-
-FRACTION=75
-
-MEMORY=`perl -ne'/^MemTotal:\s+(\d+)/ && print $1*1024;' < /proc/meminfo`
-CPUS=`grep -c processor /proc/cpuinfo`
-SIZE=$(( MEMORY * FRACTION / 100 / CPUS ))
-
-case "$1" in
-  "start")
-    param=`modinfo zram|grep num_devices|cut -f2 -d:|tr -d ' '`
-    modprobe zram $param=$CPUS
-    for n in `seq $CPUS`; do
-      i=$((n - 1))
-      echo $SIZE > /sys/block/zram$i/disksize
-      mkswap /dev/zram$i
-      swapon /dev/zram$i -p 10
-    done
-    ;;
-  "stop")
-    for n in `seq $CPUS`; do
-      i=$((n - 1))
-      swapoff /dev/zram$i && echo "disabled disk $n of $CPUS" &
-    done
-    wait
-    sleep .5
-    modprobe -r zram
-    ;;
-  *)
-    echo "Usage: `basename $0` (start | stop)"
-    exit 1
-    ;;
-esac

init.sh

@@ -1,5 +1,5 @@
 #!/bin/sh
-# Copyright (c) 2016 Dyne.org Foundation
+# Copyright (c) 2016-2017 Dyne.org Foundation
 # arm-sdk is written and maintained by Ivan J. <parazyd@dyne.org>
 #
 # This file is part of arm-sdk