Working: Klipper state ready in octoklipper.

docker-compose.yml

@@ -19,9 +19,7 @@ services:
     restart: always
     environment:
       WITH_KLIPPER: "yes"
-      KLIPPER_HOME: "/octo_printer"
       #WITH_SAFEMODE: "yes"
-      #OCTO_PRINTER: "/octo_printer"
       OCTO_PRINTER: "/tmp"
       PRINTER_CFG: "klipper-geeetech-a10-bltouch.cfg"
       SOCAT_TYPE: "TCP"

klipper/Dockerfile

@@ -14,7 +14,7 @@ ENV PRINTER_CFG=${PRINTER_CFG}
 ARG KLIPPER_HOME="/octo_printer"
 ENV KLIPPER_HOME=${KLIPPER_HOME}
 
-ARG KLIPPER_SERIAL="/hostdevice/ttyUSB0"
+ARG KLIPPER_SERIAL="/hostdevices/ttyUSB0"
 ENV KLIPPER_SERIAL=${KLIPPER_SERIAL}
 
 ARG OCTO_PRINTER="/tmp"
@@ -64,7 +64,8 @@ extra-index-url=https://www.piwheels.org/simple'\
 RUN useradd -ms /bin/bash klippy && adduser klippy dialout
 
 # Create the shared volume mount point
-RUN mkdir -p ${KLIPPER_HOME} && chown -R klippy.klippy ${KLIPPER_HOME}
+RUN mkdir -p ${KLIPPER_HOME} 
+RUN chown -R klippy.klippy ${KLIPPER_HOME}
 
 USER klippy
 
@@ -97,7 +98,7 @@ COPY klipper_cfg/firmware/config ${SRCDIR}/.config
 
 WORKDIR ${SRCDIR}
 RUN make
-#RUN make flash FLASH_DEVICE=/hostdevices/ttyUSB0 
+#RUN make flash FLASH_DEVICE=${KLIPPER_SERIAL}
 
 RUN cp out/klipper.elf.hex /home/klippy/.config/klipper/firmware/
 

klipper/bin/run.sh

@@ -18,4 +18,4 @@ sed -i 's,^\(serial: \).*,\1'${KLIPPER_SERIAL}',' ${KLIPPER_HOME}/${PRINTER_CFG}
 touch ${KLIPPER_HOME}/klippy.log
 
 echo "*** Starting klipper"
-${PYTHONDIR}/bin/python3 ${SRCDIR}/klippy/klippy.py ${KLIPPER_HOME}/${PRINTER_CFG} --logfile ${KLIPPER_HOME}/klippy.log --input-tty ${OCTO_PRINTER}/printer
+${PYTHONDIR}/bin/python3 ${SRCDIR}/klippy/klippy.py ${KLIPPER_HOME}/${PRINTER_CFG} --logfile ${KLIPPER_HOME}/klippy.log --input-tty ${OCTO_PRINTER}/printer -a ${KLIPPER_HOME}/klippy_uds

octoprint/Dockerfile

@@ -125,13 +125,9 @@ ARG SOCAT_DEBUG=""
 ENV SOCAT_DEBUG ${SOCAT_DEBUG}
 
 
-ARG KLIPPER_HOME="/octo_printer"
-ENV KLIPPER_HOME ${KLIPPER_HOME}
-
 ARG OCTO_PRINTER="/tmp"
 ENV OCTO_PRINTER ${OCTO_PRINTER}
 RUN if [ "${WITH_KLIPPER}" = "yes" ]; then \
-			#mkdir -p ${KLIPPER_HOME} && \
 			mkdir ${OCTO_PRINTER} && chgrp dialout ${OCTO_PRINTER} && \
 			pip3 install \
 				https://github.com/AliceGrey/OctoPrintKlipperPlugin/archive/master.zip \