Add fork of infused-kim's footprints
This commit is contained in:
Marco Massarelli
parent
e2d61f4ea5
commit
bbaf0bce1f
|
|
@ -0,0 +1,443 @@
|
|||
// Author: @infused-kim
|
||||
//
|
||||
// A reversible footprint for the nice!nano (or any pro-micro compatible
|
||||
// controller) that uses jumpers instead of two rows socket rows to achieve
|
||||
// reversablity.
|
||||
//
|
||||
// This is a re-implementation of the promicro_pretty footprint made popular
|
||||
// by @benvallack.
|
||||
//
|
||||
// The following improvements have been made:
|
||||
// 1. It uses real traces instead of pads, which gets rid of hundreds of
|
||||
// DRC errors.
|
||||
// 2. It leaves more space between the vias to allow easier routing through
|
||||
// the middle of the footprint
|
||||
//
|
||||
//
|
||||
// # Placement and jumper soldering:
|
||||
// The footprint is meant to be used with a nice!nano (or any other pro micro
|
||||
// compatible board) that is placed on the top side of the PCB with the
|
||||
// components facing down.
|
||||
//
|
||||
// This means when you look down at it, the RAW pin is in the upper left
|
||||
// corner and the 006 pin in the upper right corner.
|
||||
//
|
||||
// To make it work in this configuration, you solder the jumpers on the
|
||||
// OPPOSITE side.
|
||||
//
|
||||
// Due to the way how this footprint works, you can also place it with the
|
||||
// components facing up or even at the bottom. You just need to make sure you
|
||||
// solder the jumpers on the correct side.
|
||||
//
|
||||
// Regardless, the silkscreen labels are displayed in location that match when
|
||||
// the controller is placed with the components facing down.
|
||||
//
|
||||
// # Credits
|
||||
// This footprint was created from scratch, but is based on the ideas from
|
||||
// these footprints:
|
||||
// https://github.com/Albert-IV/ergogen-contrib/blob/main/src/footprints/promicro_pretty.js
|
||||
// https://github.com/50an6xy06r6n/keyboard_reversible.pretty
|
||||
|
||||
module.exports = {
|
||||
params: {
|
||||
designator: 'MCU',
|
||||
traces: true,
|
||||
RAW: {type: 'net', value: 'RAW'},
|
||||
GND: {type: 'net', value: 'GND'},
|
||||
RST: {type: 'net', value: 'RST'},
|
||||
VCC: {type: 'net', value: 'VCC'},
|
||||
P21: {type: 'net', value: 'P21'},
|
||||
P20: {type: 'net', value: 'P20'},
|
||||
P19: {type: 'net', value: 'P19'},
|
||||
P18: {type: 'net', value: 'P18'},
|
||||
P15: {type: 'net', value: 'P15'},
|
||||
P14: {type: 'net', value: 'P14'},
|
||||
P16: {type: 'net', value: 'P16'},
|
||||
P10: {type: 'net', value: 'P10'},
|
||||
|
||||
P1: {type: 'net', value: 'P1'},
|
||||
P0: {type: 'net', value: 'P0'},
|
||||
P2: {type: 'net', value: 'P2'},
|
||||
P3: {type: 'net', value: 'P3'},
|
||||
P4: {type: 'net', value: 'P4'},
|
||||
P5: {type: 'net', value: 'P5'},
|
||||
P6: {type: 'net', value: 'P6'},
|
||||
P7: {type: 'net', value: 'P7'},
|
||||
P8: {type: 'net', value: 'P8'},
|
||||
P9: {type: 'net', value: 'P9'},
|
||||
|
||||
show_instructions: true,
|
||||
show_silk_labels: true,
|
||||
show_via_labels: true,
|
||||
|
||||
RAW_label: '',
|
||||
GND_label: '',
|
||||
RST_label: '',
|
||||
VCC_label: '',
|
||||
P21_label: '',
|
||||
P20_label: '',
|
||||
P19_label: '',
|
||||
P18_label: '',
|
||||
P15_label: '',
|
||||
P14_label: '',
|
||||
P16_label: '',
|
||||
P10_label: '',
|
||||
|
||||
P1_label: '',
|
||||
P0_label: '',
|
||||
P2_label: '',
|
||||
P3_label: '',
|
||||
P4_label: '',
|
||||
P5_label: '',
|
||||
P6_label: '',
|
||||
P7_label: '',
|
||||
P8_label: '',
|
||||
P9_label: '',
|
||||
},
|
||||
body: p => {
|
||||
const get_pin_net_name = (p, pin_name) => {
|
||||
return p[pin_name].name;
|
||||
};
|
||||
|
||||
const get_pin_net_str = (p, pin_name) => {
|
||||
return p[pin_name].str;
|
||||
};
|
||||
|
||||
const get_pin_label_override = (p, pin_name) => {
|
||||
prop_name = `${pin_name}_label`;
|
||||
return p[prop_name];
|
||||
};
|
||||
|
||||
const get_pin_label = (p, pin_name) => {
|
||||
label = get_pin_label_override(p, pin_name);
|
||||
if(label == '') {
|
||||
label = get_pin_net_name(p, pin_name);
|
||||
}
|
||||
|
||||
if(label === undefined) {
|
||||
label = '""';
|
||||
}
|
||||
|
||||
return label;
|
||||
};
|
||||
|
||||
const get_at_coordinates = () => {
|
||||
const pattern = /\(at (-?[\d\.]*) (-?[\d\.]*) (-?[\d\.]*)\)/;
|
||||
const matches = p.at.match(pattern);
|
||||
if (matches && matches.length == 4) {
|
||||
return [parseFloat(matches[1]), parseFloat(matches[2]), parseFloat(matches[3])];
|
||||
} else {
|
||||
return null;
|
||||
}
|
||||
}
|
||||
|
||||
const adjust_point = (x, y) => {
|
||||
const at_l = get_at_coordinates();
|
||||
if(at_l == null) {
|
||||
throw new Error(
|
||||
`Could not get x and y coordinates from p.at: ${p.at}`
|
||||
);
|
||||
}
|
||||
const at_x = at_l[0];
|
||||
const at_y = at_l[1];
|
||||
const at_angle = at_l[2];
|
||||
const adj_x = at_x + x;
|
||||
const adj_y = at_y + y;
|
||||
|
||||
const radians = (Math.PI / 180) * at_angle,
|
||||
cos = Math.cos(radians),
|
||||
sin = Math.sin(radians),
|
||||
nx = (cos * (adj_x - at_x)) + (sin * (adj_y - at_y)) + at_x,
|
||||
ny = (cos * (adj_y - at_y)) - (sin * (adj_x - at_x)) + at_y;
|
||||
|
||||
const point_str = `${nx.toFixed(3)} ${ny.toFixed(3)}`;
|
||||
return point_str;
|
||||
}
|
||||
|
||||
const gen_traces_row = (row_num) => {
|
||||
const traces = `
|
||||
(segment (start ${ adjust_point(4.775, -12.7 + (row_num * 2.54)) }) (end ${ adjust_point(3.262, -12.7 + (row_num * 2.54)) }) (width 0.25) (layer F.Cu) (net 1))
|
||||
(segment (start ${ adjust_point(-4.335002, -12.7 + (row_num * 2.54)) }) (end ${ adjust_point(-3.610001, -11.974999 + (row_num * 2.54)) }) (width 0.25) (layer B.Cu) (net 1))
|
||||
(segment (start ${ adjust_point(-4.775, -12.7 + (row_num * 2.54)) }) (end ${ adjust_point(-4.335002, -12.7 + (row_num * 2.54)) }) (width 0.25) (layer B.Cu) (net 1))
|
||||
(segment (start ${ adjust_point(-3.610001, -11.974999 + (row_num * 2.54)) }) (end ${ adjust_point(-2.913999, -11.974999 + (row_num * 2.54)) }) (width 0.25) (layer B.Cu) (net 1))
|
||||
(segment (start ${ adjust_point(-2.536999, -12.351999 + (row_num * 2.54)) }) (end ${ adjust_point(-2.536999, -12.363001 + (row_num * 2.54)) }) (width 0.25) (layer B.Cu) (net 1))
|
||||
(segment (start ${ adjust_point(-2.913999, -11.974999 + (row_num * 2.54)) }) (end ${ adjust_point(-2.536999, -12.351999 + (row_num * 2.54)) }) (width 0.25) (layer B.Cu) (net 1))
|
||||
(segment (start ${ adjust_point(-2.536999, -12.363001 + (row_num * 2.54)) }) (end ${ adjust_point(-2.45, -12.45 + (row_num * 2.54)) }) (width 0.25) (layer B.Cu) (net 1))
|
||||
(segment (start ${ adjust_point(3.012, -12.45 + (row_num * 2.54)) }) (end ${ adjust_point(3.262, -12.7 + (row_num * 2.54)) }) (width 0.25) (layer B.Cu) (net 1))
|
||||
(segment (start ${ adjust_point(-2.45, -12.45 + (row_num * 2.54)) }) (end ${ adjust_point(3.012, -12.45 + (row_num * 2.54)) }) (width 0.25) (layer B.Cu) (net 1))
|
||||
(segment (start ${ adjust_point(-4.775, -12.7 + (row_num * 2.54)) }) (end ${ adjust_point(-3.262, -12.7 + (row_num * 2.54)) }) (width 0.25) (layer F.Cu) (net 13))
|
||||
(segment (start ${ adjust_point(3.610001, -13.425001 + (row_num * 2.54)) }) (end ${ adjust_point(2.913999, -13.425001 + (row_num * 2.54)) }) (width 0.25) (layer B.Cu) (net 13))
|
||||
(segment (start ${ adjust_point(4.335002, -12.7 + (row_num * 2.54)) }) (end ${ adjust_point(3.610001, -13.425001 + (row_num * 2.54)) }) (width 0.25) (layer B.Cu) (net 13))
|
||||
(segment (start ${ adjust_point(4.775, -12.7 + (row_num * 2.54)) }) (end ${ adjust_point(4.335002, -12.7 + (row_num * 2.54)) }) (width 0.25) (layer B.Cu) (net 13))
|
||||
(segment (start ${ adjust_point(2.913999, -13.425001 + (row_num * 2.54)) }) (end ${ adjust_point(2.438998, -12.95 + (row_num * 2.54)) }) (width 0.25) (layer B.Cu) (net 13))
|
||||
(segment (start ${ adjust_point(-3.012, -12.95 + (row_num * 2.54)) }) (end ${ adjust_point(-3.262, -12.7 + (row_num * 2.54)) }) (width 0.25) (layer B.Cu) (net 13))
|
||||
(segment (start ${ adjust_point(2.438998, -12.95 + (row_num * 2.54)) }) (end ${ adjust_point(-3.012, -12.95 + (row_num * 2.54)) }) (width 0.25) (layer B.Cu) (net 13))
|
||||
(segment (start ${ adjust_point(-7.62, -12.7 + (row_num * 2.54)) }) (end ${ adjust_point(-5.5, -12.7 + (row_num * 2.54)) }) (width 0.25) (layer F.Cu) (net 23))
|
||||
(segment (start ${ adjust_point(-7.62, -12.7 + (row_num * 2.54)) }) (end ${ adjust_point(-5.5, -12.7 + (row_num * 2.54)) }) (width 0.25) (layer B.Cu) (net 23))
|
||||
(segment (start ${ adjust_point(5.5, -12.7 + (row_num * 2.54)) }) (end ${ adjust_point(7.62, -12.7 + (row_num * 2.54)) }) (width 0.25) (layer F.Cu) (net 24))
|
||||
(segment (start ${ adjust_point(7.62, -12.7 + (row_num * 2.54)) }) (end ${ adjust_point(5.5, -12.7 + (row_num * 2.54)) }) (width 0.25) (layer B.Cu) (net 24))
|
||||
`
|
||||
|
||||
return traces
|
||||
}
|
||||
|
||||
const gen_traces = () => {
|
||||
let traces = '';
|
||||
for (let i = 0; i < 12; i++) {
|
||||
row_traces = gen_traces_row(i)
|
||||
traces += row_traces
|
||||
}
|
||||
|
||||
return traces
|
||||
}
|
||||
|
||||
const gen_socket_row = (row_num, pin_name_left, pin_name_right, show_via_labels, show_silk_labels) => {
|
||||
const row_offset_y = 2.54 * row_num
|
||||
|
||||
const socket_hole_num_left = 24 - row_num
|
||||
const socket_hole_num_right = 1 + row_num
|
||||
const via_num_left = 124 - row_num
|
||||
const via_num_right = 1 + row_num
|
||||
|
||||
const net_left = get_pin_net_str(p, pin_name_left)
|
||||
const net_right = get_pin_net_str(p, pin_name_right)
|
||||
const via_label_left = get_pin_label(p, pin_name_left)
|
||||
const via_label_right = get_pin_label(p, pin_name_right)
|
||||
|
||||
// These are the silkscreen labels that will be printed on the PCB.
|
||||
// They tell us the orientation if the controller is placed with
|
||||
// the components down, on top of the PCB and the jumpers are
|
||||
// soldered on the opposite side than the controller.
|
||||
const net_silk_front_left = via_label_right
|
||||
const net_silk_front_right = via_label_left
|
||||
const net_silk_back_left = via_label_left
|
||||
const net_silk_back_right = via_label_right
|
||||
|
||||
let socket_row = `
|
||||
${''/* Socket Holes */}
|
||||
(pad ${socket_hole_num_left} thru_hole circle (at -7.62 ${-12.7 + row_offset_y}) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) ${p.local_net(socket_hole_num_left).str})
|
||||
(pad ${socket_hole_num_right} thru_hole circle (at 7.62 ${-12.7 + row_offset_y}) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) ${p.local_net(socket_hole_num_right).str})
|
||||
|
||||
${''/* Inside VIAS */}
|
||||
(pad ${via_num_left} thru_hole circle (at -3.262 ${-12.7 + row_offset_y}) (size 0.8 0.8) (drill 0.4) (layers *.Cu *.Mask) ${net_left})
|
||||
(pad ${via_num_right} thru_hole circle (at 3.262 ${-12.7 + row_offset_y}) (size 0.8 0.8) (drill 0.4) (layers *.Cu *.Mask) ${net_right})
|
||||
|
||||
${''/* Jumper Pads - Front Left */}
|
||||
(pad ${socket_hole_num_left} smd custom (at -5.5 ${-12.7 + row_offset_y}) (size 0.2 0.2) (layers F.Cu F.Mask) ${p.local_net(socket_hole_num_left).str}
|
||||
(zone_connect 2)
|
||||
(options (clearance outline) (anchor rect))
|
||||
(primitives
|
||||
(gr_poly (pts
|
||||
(xy -0.5 -0.625) (xy -0.25 -0.625) (xy 0.25 0) (xy -0.25 0.625) (xy -0.5 0.625)
|
||||
) (width 0))
|
||||
))
|
||||
(pad ${via_num_left} smd custom (at -4.775 ${-12.7 + row_offset_y}) (size 0.2 0.2) (layers F.Cu F.Mask) ${net_left}
|
||||
(zone_connect 2)
|
||||
(options (clearance outline) (anchor rect))
|
||||
(primitives
|
||||
(gr_poly (pts
|
||||
(xy -0.65 -0.625) (xy 0.5 -0.625) (xy 0.5 0.625) (xy -0.65 0.625) (xy -0.15 0)
|
||||
) (width 0))
|
||||
))
|
||||
|
||||
${''/* Jumper Pads - Front Right */}
|
||||
(pad ${via_num_right} smd custom (at 4.775 ${-12.7 + row_offset_y} 180) (size 0.2 0.2) (layers F.Cu F.Mask) ${net_right}
|
||||
(zone_connect 2)
|
||||
(options (clearance outline) (anchor rect))
|
||||
(primitives
|
||||
(gr_poly (pts
|
||||
(xy -0.65 -0.625) (xy 0.5 -0.625) (xy 0.5 0.625) (xy -0.65 0.625) (xy -0.15 0)
|
||||
) (width 0))
|
||||
))
|
||||
(pad ${socket_hole_num_right} smd custom (at 5.5 ${-12.7 + row_offset_y} 180) (size 0.2 0.2) (layers F.Cu F.Mask) ${p.local_net(socket_hole_num_right).str}
|
||||
(zone_connect 2)
|
||||
(options (clearance outline) (anchor rect))
|
||||
(primitives
|
||||
(gr_poly (pts
|
||||
(xy -0.5 -0.625) (xy -0.25 -0.625) (xy 0.25 0) (xy -0.25 0.625) (xy -0.5 0.625)
|
||||
) (width 0))
|
||||
))
|
||||
|
||||
${''/* Jumper Pads - Back Left */}
|
||||
(pad ${socket_hole_num_left} smd custom (at -5.5 ${-12.7 + row_offset_y}) (size 0.2 0.2) (layers B.Cu B.Mask) ${p.local_net(socket_hole_num_left).str}
|
||||
(zone_connect 2)
|
||||
(options (clearance outline) (anchor rect))
|
||||
(primitives
|
||||
(gr_poly (pts
|
||||
(xy -0.5 0.625) (xy -0.25 0.625) (xy 0.25 0) (xy -0.25 -0.625) (xy -0.5 -0.625)
|
||||
) (width 0))
|
||||
))
|
||||
|
||||
(pad ${via_num_right} smd custom (at -4.775 ${-12.7 + row_offset_y}) (size 0.2 0.2) (layers B.Cu B.Mask) ${net_right}
|
||||
(zone_connect 2)
|
||||
(options (clearance outline) (anchor rect))
|
||||
(primitives
|
||||
(gr_poly (pts
|
||||
(xy -0.65 0.625) (xy 0.5 0.625) (xy 0.5 -0.625) (xy -0.65 -0.625) (xy -0.15 0)
|
||||
) (width 0))
|
||||
))
|
||||
|
||||
${''/* Jumper Pads - Back Right */}
|
||||
(pad ${via_num_left} smd custom (at 4.775 ${-12.7 + row_offset_y} 180) (size 0.2 0.2) (layers B.Cu B.Mask) ${net_left}
|
||||
(zone_connect 2)
|
||||
(options (clearance outline) (anchor rect))
|
||||
(primitives
|
||||
(gr_poly (pts
|
||||
(xy -0.65 0.625) (xy 0.5 0.625) (xy 0.5 -0.625) (xy -0.65 -0.625) (xy -0.15 0)
|
||||
) (width 0))
|
||||
))
|
||||
(pad ${socket_hole_num_right} smd custom (at 5.5 ${-12.7 + row_offset_y} 180) (size 0.2 0.2) (layers B.Cu B.Mask) ${p.local_net(socket_hole_num_right).str}
|
||||
(zone_connect 2)
|
||||
(options (clearance outline) (anchor rect))
|
||||
(primitives
|
||||
(gr_poly (pts
|
||||
(xy -0.5 0.625) (xy -0.25 0.625) (xy 0.25 0) (xy -0.25 -0.625) (xy -0.5 -0.625)
|
||||
) (width 0))
|
||||
))
|
||||
`
|
||||
|
||||
if(show_silk_labels == true) {
|
||||
socket_row += `
|
||||
|
||||
${''/* Silkscreen Labels - Front */}
|
||||
(fp_text user ${net_silk_front_left} (at -3 ${-12.7 + row_offset_y}) (layer F.SilkS)
|
||||
(effects (font (size 1 1) (thickness 0.15)) (justify left))
|
||||
)
|
||||
(fp_text user ${net_silk_front_right} (at 3 ${-12.7 + row_offset_y}) (layer F.SilkS)
|
||||
(effects (font (size 1 1) (thickness 0.15)) (justify right))
|
||||
)
|
||||
|
||||
${''/* Silkscreen Labels - Back */}
|
||||
(fp_text user ${net_silk_back_left} (at -3 ${-12.7 + row_offset_y} 180) (layer B.SilkS)
|
||||
(effects (font (size 1 1) (thickness 0.15)) (justify right mirror))
|
||||
)
|
||||
(fp_text user ${net_silk_back_right} (at 3 ${-12.7 + row_offset_y} 180) (layer B.SilkS)
|
||||
(effects (font (size 1 1) (thickness 0.15)) (justify left mirror))
|
||||
)
|
||||
`
|
||||
}
|
||||
|
||||
if(show_via_labels == true) {
|
||||
socket_row += `
|
||||
${''/* Via Labels - Front */}
|
||||
(fp_text user ${via_label_left} (at -3.262 ${-13.5 + row_offset_y}) (layer F.Fab)
|
||||
(effects (font (size 0.5 0.5) (thickness 0.08)))
|
||||
)
|
||||
(fp_text user ${via_label_right} (at 3.262 ${-13.5 + row_offset_y}) (layer F.Fab)
|
||||
(effects (font (size 0.5 0.5) (thickness 0.08)))
|
||||
)
|
||||
|
||||
${''/* Via Labels - Back */}
|
||||
(fp_text user ${via_label_left} (at -3.262 ${-13.5 + row_offset_y} 180) (layer B.Fab)
|
||||
(effects (font (size 0.5 0.5) (thickness 0.08)) (justify mirror))
|
||||
)
|
||||
(fp_text user ${via_label_right} (at 3.262 ${-13.5 + row_offset_y} 180) (layer B.Fab)
|
||||
(effects (font (size 0.5 0.5) (thickness 0.08)) (justify mirror))
|
||||
)
|
||||
`
|
||||
}
|
||||
|
||||
return socket_row
|
||||
}
|
||||
|
||||
const gen_socket_rows = (show_via_labels, show_silk_labels) => {
|
||||
const pin_names = [
|
||||
['P1', 'RAW'],
|
||||
['P0', 'GND'],
|
||||
['GND', 'RST'],
|
||||
['GND', 'VCC'],
|
||||
['P2', 'P21'],
|
||||
['P3', 'P20'],
|
||||
['P4', 'P19'],
|
||||
['P5', 'P18'],
|
||||
['P6', 'P15'],
|
||||
['P7', 'P14'],
|
||||
['P8', 'P16'],
|
||||
['P9', 'P10'],
|
||||
]
|
||||
let socket_rows = '';
|
||||
for (let i = 0; i < pin_names.length; i++) {
|
||||
pin_name_left = pin_names[i][0]
|
||||
pin_name_right = pin_names[i][1]
|
||||
|
||||
const socket_row = gen_socket_row(
|
||||
i, pin_name_left, pin_name_right,
|
||||
show_via_labels, show_silk_labels
|
||||
)
|
||||
|
||||
socket_rows += socket_row
|
||||
}
|
||||
|
||||
return socket_rows
|
||||
}
|
||||
|
||||
const common_top = `
|
||||
(module nice_nano (layer F.Cu) (tedit 6451A4F1)
|
||||
(attr virtual)
|
||||
${p.at /* parametric position */}
|
||||
(fp_text reference "${p.ref}" (at 0 -15) (layer F.SilkS) ${p.ref_hide}
|
||||
(effects (font (size 1 1) (thickness 0.15)))
|
||||
)
|
||||
|
||||
${''/* USB Socket Outline */}
|
||||
(fp_line (start 3.556 -18.034) (end 3.556 -16.51) (layer Dwgs.User) (width 0.15))
|
||||
(fp_line (start -3.81 -16.51) (end -3.81 -18.034) (layer Dwgs.User) (width 0.15))
|
||||
(fp_line (start -3.81 -18.034) (end 3.556 -18.034) (layer Dwgs.User) (width 0.15))
|
||||
|
||||
|
||||
${''/* Controller top part outline */}
|
||||
(fp_line (start -8.89 -16.51) (end 8.89 -16.51) (layer F.Fab) (width 0.12))
|
||||
(fp_line (start -8.89 -16.51) (end -8.89 -14) (layer F.Fab) (width 0.12))
|
||||
(fp_line (start 8.89 -16.51) (end 8.89 -14) (layer F.Fab) (width 0.12))
|
||||
(fp_line (start -8.89 -16.5) (end -8.89 -13.99) (layer B.Fab) (width 0.12))
|
||||
(fp_line (start 8.89 -16.51) (end 8.89 -14) (layer B.Fab) (width 0.12))
|
||||
(fp_line (start -8.89 -16.51) (end 8.89 -16.51) (layer B.Fab) (width 0.12))
|
||||
|
||||
${''/* Socket outlines */}
|
||||
(fp_line (start 6.29 -11.43) (end 8.95 -11.43) (layer F.SilkS) (width 0.12))
|
||||
(fp_line (start 6.29 -14.03) (end 8.95 -14.03) (layer F.SilkS) (width 0.12))
|
||||
(fp_line (start 6.29 -14.03) (end 6.29 16.57) (layer F.SilkS) (width 0.12))
|
||||
(fp_line (start 6.29 16.57) (end 8.95 16.57) (layer F.SilkS) (width 0.12))
|
||||
(fp_line (start 8.95 -14.03) (end 8.95 16.57) (layer F.SilkS) (width 0.12))
|
||||
(fp_line (start -8.95 -14.03) (end -6.29 -14.03) (layer F.SilkS) (width 0.12))
|
||||
(fp_line (start -8.95 -14.03) (end -8.95 16.57) (layer F.SilkS) (width 0.12))
|
||||
(fp_line (start -8.95 16.57) (end -6.29 16.57) (layer F.SilkS) (width 0.12))
|
||||
(fp_line (start -6.29 -14.03) (end -6.29 16.57) (layer F.SilkS) (width 0.12))
|
||||
(fp_line (start -8.95 -11.43) (end -6.29 -11.43) (layer B.SilkS) (width 0.12))
|
||||
(fp_line (start -6.29 -14.03) (end -8.95 -14.03) (layer B.SilkS) (width 0.12))
|
||||
(fp_line (start -6.29 -14.03) (end -6.29 16.57) (layer B.SilkS) (width 0.12))
|
||||
(fp_line (start -6.29 16.57) (end -8.95 16.57) (layer B.SilkS) (width 0.12))
|
||||
(fp_line (start -8.95 -14.03) (end -8.95 16.57) (layer B.SilkS) (width 0.12))
|
||||
(fp_line (start 8.95 -14.03) (end 6.29 -14.03) (layer B.SilkS) (width 0.12))
|
||||
(fp_line (start 8.95 -14.03) (end 8.95 16.57) (layer B.SilkS) (width 0.12))
|
||||
(fp_line (start 8.95 16.57) (end 6.29 16.57) (layer B.SilkS) (width 0.12))
|
||||
(fp_line (start 6.29 -14.03) (end 6.29 16.57) (layer B.SilkS) (width 0.12))
|
||||
`;
|
||||
|
||||
const instructions = `
|
||||
(fp_text user "R. Side - Jumper Here" (at 0 -15.245) (layer F.SilkS)
|
||||
(effects (font (size 1 1) (thickness 0.15)))
|
||||
)
|
||||
(fp_text user "L. Side - Jumper Here" (at 0 -15.245) (layer B.SilkS)
|
||||
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
|
||||
)
|
||||
`
|
||||
|
||||
const socket_rows = gen_socket_rows(
|
||||
p.show_via_labels, p.show_silk_labels
|
||||
)
|
||||
const traces = gen_traces()
|
||||
|
||||
|
||||
return `
|
||||
${''/* Controller*/}
|
||||
${ common_top }
|
||||
${ socket_rows }
|
||||
${ p.show_instructions ? instructions : '' }
|
||||
)
|
||||
|
||||
${''/* Traces */}
|
||||
${ p.traces ? traces : ''}
|
||||
`;
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,245 @@
|
|||
// Author: @infused-kim
|
||||
//
|
||||
// Description:
|
||||
// Reversible footprint for nice!view display. Includes an outline of the
|
||||
// display to make positioning easier.
|
||||
|
||||
module.exports = {
|
||||
params: {
|
||||
designator: 'DISP',
|
||||
side: 'F',
|
||||
MOSI: {type: 'net', value: 'MOSI'},
|
||||
SCK: {type: 'net', value: 'SCK'},
|
||||
VCC: {type: 'net', value: 'VCC'},
|
||||
GND: {type: 'net', value: 'GND'},
|
||||
CS: {type: 'net', value: 'CS'},
|
||||
reversible: false,
|
||||
show_labels: true,
|
||||
jumpers_at_bottom: false,
|
||||
},
|
||||
body: p => {
|
||||
|
||||
let dst_nets = [
|
||||
p.CS.str,
|
||||
p.GND.str,
|
||||
p.VCC.str,
|
||||
p.SCK.str,
|
||||
p.MOSI.str,
|
||||
];
|
||||
|
||||
local_nets = [
|
||||
p.local_net("1").str,
|
||||
p.local_net("2").str,
|
||||
p.VCC.str,
|
||||
p.local_net("4").str,
|
||||
p.local_net("5").str,
|
||||
];
|
||||
|
||||
let socket_nets = dst_nets;
|
||||
|
||||
if(p.reversible) {
|
||||
socket_nets = local_nets;
|
||||
} else if(p.side == 'B') {
|
||||
socket_nets = dst_nets.slice().reverse();
|
||||
}
|
||||
|
||||
let jumpers_offset = 0;
|
||||
let jumpers_rot = 0;
|
||||
let labels_offset = 0;
|
||||
let label_vcc_offset = 0;
|
||||
|
||||
let jumpers_front_top = dst_nets;
|
||||
let jumpers_front_bottom = local_nets;
|
||||
let jumpers_back_top = dst_nets;
|
||||
let jumpers_back_bottom = local_nets.slice().reverse();
|
||||
|
||||
if(p.jumpers_at_bottom) {
|
||||
jumpers_offset = 5.7;
|
||||
jumpers_rot = 180;
|
||||
labels_offset = jumpers_offset + 2 + 1 + 0.1;
|
||||
label_vcc_offset = 4.85;
|
||||
|
||||
jumpers_front_top = local_nets;
|
||||
jumpers_front_bottom = dst_nets;
|
||||
jumpers_back_top = local_nets.slice().reverse();
|
||||
jumpers_back_bottom = dst_nets;
|
||||
}
|
||||
|
||||
const top = `
|
||||
(module nice!view (layer F.Cu) (tedit 6448AF5B)
|
||||
${p.at /* parametric position */}
|
||||
(attr virtual)
|
||||
(fp_text reference "${p.ref}" (at 0 20 ${p.rot}) (layer ${p.side}.SilkS) ${p.ref_hide}
|
||||
(effects (font (size 1 1) (thickness 0.15)))
|
||||
)
|
||||
`
|
||||
const front = `
|
||||
(fp_text user %R (at 0 20 ${p.rot}) (layer F.Fab)
|
||||
(fp_line (start -6.5 -18) (end 6.5 -18) (layer F.Fab) (width 0.15))
|
||||
(fp_line (start 6.5 18) (end -6.5 18) (layer F.Fab) (width 0.15))
|
||||
(fp_line (start -7 17.5) (end -7 -17.5) (layer F.Fab) (width 0.15))
|
||||
(fp_line (start 7 17.5) (end 7 -17.5) (layer F.Fab) (width 0.15))
|
||||
(fp_arc (start -6.5 17.5) (end -7 17.5) (angle -90) (layer F.Fab) (width 0.15))
|
||||
(fp_arc (start 6.5 17.5) (end 6.5 18) (angle -90) (layer F.Fab) (width 0.15))
|
||||
(fp_arc (start 6.5 -17.5) (end 6.5 -18) (angle 90) (layer F.Fab) (width 0.15))
|
||||
(fp_arc (start -6.5 -17.5) (end -6.5 -18) (angle -90) (layer F.Fab) (width 0.15))
|
||||
(fp_line (start -6.41 15.37) (end -6.41 18.03) (layer F.SilkS) (width 0.12))
|
||||
(fp_line (start 6.41 18.03) (end -6.41 18.03) (layer F.SilkS) (width 0.12))
|
||||
(fp_line (start 6.41 15.37) (end 6.41 18.03) (layer F.SilkS) (width 0.12))
|
||||
(fp_line (start 6.41 15.37) (end -6.41 15.37) (layer F.SilkS) (width 0.12))
|
||||
(fp_line (start 6.88 14.9) (end 6.88 18.45) (layer F.CrtYd) (width 0.15))
|
||||
(fp_line (start 6.88 18.45) (end -6.82 18.45) (layer F.CrtYd) (width 0.15))
|
||||
(fp_line (start -6.82 18.45) (end -6.82 14.9) (layer F.CrtYd) (width 0.15))
|
||||
(fp_line (start -6.82 14.9) (end 6.88 14.9) (layer F.CrtYd) (width 0.15))
|
||||
(effects (font (size 1 1) (thickness 0.15)))
|
||||
)
|
||||
|
||||
`
|
||||
|
||||
const front_jumpers = `
|
||||
(fp_line (start 5.93 ${12.9 + jumpers_offset}) (end 5.93 ${14.9 + jumpers_offset}) (layer F.Fab) (width 0.15))
|
||||
(fp_line (start -5.93 ${14.9 + jumpers_offset}) (end -5.93 ${12.9 + jumpers_offset}) (layer F.Fab) (width 0.15))
|
||||
(fp_line (start -5.93 ${12.9 + jumpers_offset}) (end -4.23 ${12.9 + jumpers_offset}) (layer F.Fab) (width 0.15))
|
||||
(fp_line (start -4.23 ${14.9 + jumpers_offset}) (end -5.93 ${14.9 + jumpers_offset}) (layer F.Fab) (width 0.15))
|
||||
(fp_line (start -4.23 ${12.9 + jumpers_offset}) (end -4.23 ${14.9 + jumpers_offset}) (layer F.Fab) (width 0.15))
|
||||
(fp_line (start -3.39 ${14.9 + jumpers_offset}) (end -3.39 ${12.9 + jumpers_offset}) (layer F.Fab) (width 0.15))
|
||||
(fp_line (start -3.39 ${12.9 + jumpers_offset}) (end -1.69 ${12.9 + jumpers_offset}) (layer F.Fab) (width 0.15))
|
||||
(fp_line (start -1.69 ${14.9 + jumpers_offset}) (end -3.39 ${14.9 + jumpers_offset}) (layer F.Fab) (width 0.15))
|
||||
(fp_line (start -1.69 ${12.9 + jumpers_offset}) (end -1.69 ${14.9 + jumpers_offset}) (layer F.Fab) (width 0.15))
|
||||
(fp_line (start 3.39 ${12.9 + jumpers_offset}) (end 3.39 ${14.9 + jumpers_offset}) (layer F.Fab) (width 0.15))
|
||||
(fp_line (start 3.39 ${14.9 + jumpers_offset}) (end 1.69 ${14.9 + jumpers_offset}) (layer F.Fab) (width 0.15))
|
||||
(fp_line (start 1.69 ${14.9 + jumpers_offset}) (end 1.69 ${12.9 + jumpers_offset}) (layer F.Fab) (width 0.15))
|
||||
(fp_line (start 1.69 ${12.9 + jumpers_offset}) (end 3.39 ${12.9 + jumpers_offset}) (layer F.Fab) (width 0.15))
|
||||
(fp_line (start 5.93 ${14.9 + jumpers_offset}) (end 4.23 ${14.9 + jumpers_offset}) (layer F.Fab) (width 0.15))
|
||||
(fp_line (start 4.23 ${14.9 + jumpers_offset}) (end 4.23 ${12.9 + jumpers_offset}) (layer F.Fab) (width 0.15))
|
||||
(fp_line (start 4.23 ${12.9 + jumpers_offset}) (end 5.93 ${12.9 + jumpers_offset}) (layer F.Fab) (width 0.15))
|
||||
|
||||
(pad 14 smd rect (at -5.08 ${13.45 + jumpers_offset} ${90 + p.rot}) (size 0.6 1.2) (layers F.Cu F.Mask) ${ jumpers_front_top[0] })
|
||||
(pad 15 smd rect (at -2.54 ${13.45 + jumpers_offset} ${90 + p.rot}) (size 0.6 1.2) (layers F.Cu F.Mask) ${ jumpers_front_top[1] })
|
||||
(pad 16 smd rect (at 2.54 ${13.45 + jumpers_offset} ${90 + p.rot}) (size 0.6 1.2) (layers F.Cu F.Mask) ${ jumpers_front_top[3] })
|
||||
(pad 17 smd rect (at 5.08 ${13.45 + jumpers_offset} ${90 + p.rot}) (size 0.6 1.2) (layers F.Cu F.Mask) ${ jumpers_front_top[4] })
|
||||
|
||||
(pad 10 smd rect (at -5.08 ${14.35 + jumpers_offset} ${90 + p.rot}) (size 0.6 1.2) (layers F.Cu F.Mask) ${ jumpers_front_bottom[0] })
|
||||
(pad 11 smd rect (at -2.54 ${14.35 + jumpers_offset} ${90 + p.rot}) (size 0.6 1.2) (layers F.Cu F.Mask) ${ jumpers_front_bottom[1] })
|
||||
(pad 12 smd rect (at 2.54 ${14.35 + jumpers_offset} ${90 + p.rot}) (size 0.6 1.2) (layers F.Cu F.Mask) ${ jumpers_front_bottom[3] })
|
||||
(pad 13 smd rect (at 5.08 ${14.35 + jumpers_offset} ${90 + p.rot}) (size 0.6 1.2) (layers F.Cu F.Mask) ${ jumpers_front_bottom[4] })
|
||||
`
|
||||
|
||||
const back = `
|
||||
(fp_line (start 6.41 15.37) (end 6.41 18.03) (layer B.SilkS) (width 0.12))
|
||||
(fp_line (start 6.41 15.37) (end -6.41 15.37) (layer B.SilkS) (width 0.12))
|
||||
(fp_line (start 6.41 18.03) (end -6.41 18.03) (layer B.SilkS) (width 0.12))
|
||||
(fp_line (start 6.88 14.9) (end 6.88 18.45) (layer B.CrtYd) (width 0.15))
|
||||
(fp_line (start 6.88 18.45) (end -6.82 18.45) (layer B.CrtYd) (width 0.15))
|
||||
(fp_line (start -6.82 18.45) (end -6.82 14.9) (layer B.CrtYd) (width 0.15))
|
||||
(fp_line (start -6.82 14.9) (end 6.88 14.9) (layer B.CrtYd) (width 0.15))
|
||||
(fp_line (start -6.41 15.37) (end -6.41 18.03) (layer B.SilkS) (width 0.12))
|
||||
(fp_line (start -6.5 18) (end 6.5 18) (layer B.Fab) (width 0.15))
|
||||
(fp_line (start 7 -17.5) (end 7 17.5) (layer B.Fab) (width 0.15))
|
||||
(fp_line (start 6.5 -18) (end -6.5 -18) (layer B.Fab) (width 0.15))
|
||||
(fp_line (start -7 -17.5) (end -7 17.5) (layer B.Fab) (width 0.15))
|
||||
(fp_arc (start -6.5 -17.5) (end -7 -17.5) (angle 90) (layer B.Fab) (width 0.15))
|
||||
(fp_arc (start 6.5 -17.5) (end 6.5 -18) (angle 90) (layer B.Fab) (width 0.15))
|
||||
(fp_arc (start 6.5 17.5) (end 6.5 18) (angle -90) (layer B.Fab) (width 0.15))
|
||||
(fp_arc (start -6.5 17.5) (end -6.5 18) (angle 90) (layer B.Fab) (width 0.15))
|
||||
`
|
||||
|
||||
const back_jumpers = `
|
||||
(fp_line (start -5.93 ${12.9 + jumpers_offset}) (end -5.93 ${14.9 + jumpers_offset}) (layer B.Fab) (width 0.15))
|
||||
(fp_line (start -5.93 ${14.9 + jumpers_offset}) (end -4.23 ${14.9 + jumpers_offset}) (layer B.Fab) (width 0.15))
|
||||
(fp_line (start -4.23 ${12.9 + jumpers_offset}) (end -5.93 ${12.9 + jumpers_offset}) (layer B.Fab) (width 0.15))
|
||||
(fp_line (start -4.23 ${14.9 + jumpers_offset}) (end -4.23 ${12.9 + jumpers_offset}) (layer B.Fab) (width 0.15))
|
||||
(fp_line (start -3.39 ${14.9 + jumpers_offset}) (end -1.69 ${14.9 + jumpers_offset}) (layer B.Fab) (width 0.15))
|
||||
(fp_line (start -1.69 ${12.9 + jumpers_offset}) (end -3.39 ${12.9 + jumpers_offset}) (layer B.Fab) (width 0.15))
|
||||
(fp_line (start 4.23 ${14.9 + jumpers_offset}) (end 5.93 ${14.9 + jumpers_offset}) (layer B.Fab) (width 0.15))
|
||||
(fp_line (start 5.93 ${14.9 + jumpers_offset}) (end 5.93 ${12.9 + jumpers_offset}) (layer B.Fab) (width 0.15))
|
||||
(fp_line (start 3.39 ${12.9 + jumpers_offset}) (end 1.69 ${12.9 + jumpers_offset}) (layer B.Fab) (width 0.15))
|
||||
(fp_line (start -1.69 ${14.9 + jumpers_offset}) (end -1.69 ${12.9 + jumpers_offset}) (layer B.Fab) (width 0.15))
|
||||
(fp_line (start -3.39 ${12.9 + jumpers_offset}) (end -3.39 ${14.9 + jumpers_offset}) (layer B.Fab) (width 0.15))
|
||||
(fp_line (start 1.69 ${12.9 + jumpers_offset}) (end 1.69 ${14.9 + jumpers_offset}) (layer B.Fab) (width 0.15))
|
||||
(fp_line (start 1.69 ${14.9 + jumpers_offset}) (end 3.39 ${14.9 + jumpers_offset}) (layer B.Fab) (width 0.15))
|
||||
(fp_line (start 3.39 ${14.9 + jumpers_offset}) (end 3.39 ${12.9 + jumpers_offset}) (layer B.Fab) (width 0.15))
|
||||
(fp_line (start 5.93 ${12.9 + jumpers_offset}) (end 4.23 ${12.9 + jumpers_offset}) (layer B.Fab) (width 0.15))
|
||||
(fp_line (start 4.23 ${12.9 + jumpers_offset}) (end 4.23 ${14.9 + jumpers_offset}) (layer B.Fab) (width 0.15))
|
||||
|
||||
(pad 24 smd rect (at 5.08 ${13.45 + jumpers_offset} ${270 + p.rot}) (size 0.6 1.2) (layers B.Cu B.Mask) ${ jumpers_back_top[0] })
|
||||
(pad 25 smd rect (at 2.54 ${13.45 + jumpers_offset} ${270 + p.rot}) (size 0.6 1.2) (layers B.Cu B.Mask) ${ jumpers_back_top[1] })
|
||||
(pad 26 smd rect (at -2.54 ${13.45 + jumpers_offset} ${270 + p.rot}) (size 0.6 1.2) (layers B.Cu B.Mask) ${ jumpers_back_top[3] })
|
||||
(pad 27 smd rect (at -5.08 ${13.45 + jumpers_offset} ${270 + p.rot}) (size 0.6 1.2) (layers B.Cu B.Mask) ${ jumpers_back_top[4] })
|
||||
|
||||
(pad 20 smd rect (at 5.08 ${14.35 + jumpers_offset} ${270 + p.rot}) (size 0.6 1.2) (layers B.Cu B.Mask) ${ jumpers_back_bottom[0] })
|
||||
(pad 21 smd rect (at 2.54 ${14.35 + jumpers_offset} ${270 + p.rot}) (size 0.6 1.2) (layers B.Cu B.Mask) ${ jumpers_back_bottom[1] })
|
||||
(pad 22 smd rect (at -2.54 ${14.35 + jumpers_offset} ${270 + p.rot}) (size 0.6 1.2) (layers B.Cu B.Mask) ${ jumpers_back_bottom[3] })
|
||||
(pad 23 smd rect (at -5.08 ${14.35 + jumpers_offset} ${270 + p.rot}) (size 0.6 1.2) (layers B.Cu B.Mask) ${ jumpers_back_bottom[4] })
|
||||
`
|
||||
|
||||
const labels = `
|
||||
(fp_text user DA (at -5.08 ${12.5 + labels_offset} ${p.rot}) (layer F.SilkS)
|
||||
(effects (font (size 1 0.7) (thickness 0.1)))
|
||||
)
|
||||
(fp_text user CS (at 5.12 ${12.5 + labels_offset} ${p.rot}) (layer F.SilkS)
|
||||
(effects (font (size 1 0.7) (thickness 0.1)))
|
||||
)
|
||||
(fp_text user GND (at 2.62 ${12.5 + labels_offset} ${p.rot}) (layer F.SilkS)
|
||||
(effects (font (size 1 0.7) (thickness 0.1)))
|
||||
)
|
||||
(fp_text user VCC (at 0.15 ${14.4 + label_vcc_offset} ${p.rot}) (layer F.SilkS)
|
||||
(effects (font (size 1 0.7) (thickness 0.1)))
|
||||
)
|
||||
(fp_text user CL (at -2.48 ${12.5 + labels_offset} ${p.rot}) (layer F.SilkS)
|
||||
(effects (font (size 1 0.7) (thickness 0.1)))
|
||||
)
|
||||
(fp_text user CS (at -4.98 ${12.5 + labels_offset} ${p.rot}) (layer B.SilkS)
|
||||
(effects (font (size 1 0.7) (thickness 0.1)) (justify mirror))
|
||||
)
|
||||
(fp_text user VCC (at 0.15 ${14.4 + label_vcc_offset} ${p.rot}) (layer B.SilkS)
|
||||
(effects (font (size 1 0.7) (thickness 0.1)) (justify mirror))
|
||||
)
|
||||
(fp_text user DA (at 5.22 ${12.5 + labels_offset} ${p.rot}) (layer B.SilkS)
|
||||
(effects (font (size 1 0.7) (thickness 0.1)) (justify mirror))
|
||||
)
|
||||
(fp_text user CL (at 2.72 ${12.5 + labels_offset} ${p.rot}) (layer B.SilkS)
|
||||
(effects (font (size 1 0.7) (thickness 0.1)) (justify mirror))
|
||||
)
|
||||
(fp_text user GND (at -2.38 ${12.5 + labels_offset} ${p.rot}) (layer B.SilkS)
|
||||
(effects (font (size 1 0.7) (thickness 0.1)) (justify mirror))
|
||||
)
|
||||
`
|
||||
|
||||
const bottom = `
|
||||
(pad 1 thru_hole oval (at -5.08 16.7 ${270 + p.rot}) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) ${ socket_nets[0] })
|
||||
(pad 2 thru_hole oval (at -2.54 16.7 ${270 + p.rot}) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) ${ socket_nets[1] })
|
||||
(pad 3 thru_hole oval (at 0 16.7 ${270 + p.rot}) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) ${ socket_nets[2] })
|
||||
(pad 4 thru_hole oval (at 2.54 16.7 ${270 + p.rot}) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) ${ socket_nets[3] })
|
||||
(pad 5 thru_hole circle (at 5.08 16.7 ${270 + p.rot}) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) ${ socket_nets[4] })
|
||||
|
||||
(fp_line (start 5.4 13.4) (end 5.4 -11.9) (layer Dwgs.User) (width 0.15))
|
||||
(fp_line (start -5.4 13.4) (end -5.4 -11.9) (layer Dwgs.User) (width 0.15))
|
||||
(fp_line (start 5.4 -11.9) (end -5.4 -11.9) (layer Dwgs.User) (width 0.15))
|
||||
(fp_line (start -5.4 13.4) (end 5.4 13.4) (layer Dwgs.User) (width 0.15))
|
||||
)
|
||||
`
|
||||
|
||||
let final = top;
|
||||
|
||||
if(p.side == "F" || p.reversible) {
|
||||
final += front;
|
||||
}
|
||||
if(p.side == "B" || p.reversible) {
|
||||
final += back;
|
||||
}
|
||||
|
||||
if(p.reversible) {
|
||||
final += front_jumpers;
|
||||
final += back_jumpers;
|
||||
|
||||
if(p.show_labels) {
|
||||
final += labels;
|
||||
}
|
||||
}
|
||||
|
||||
final += bottom;
|
||||
|
||||
return final;
|
||||
}
|
||||
}
|
||||
Loading…
Reference in New Issue