Add traces to reversible footprint
This commit is contained in:
Marco Massarelli
parent
d40fc6e72e
commit
e0859d08f1
|
|
@ -16,23 +16,58 @@ module.exports = {
|
|||
reversible: false,
|
||||
show_labels: true,
|
||||
jumpers_at_bottom: false,
|
||||
traces: true,
|
||||
trace_width: 0.15,
|
||||
gnd_trace_width: 0.25,
|
||||
},
|
||||
body: p => {
|
||||
const get_at_coordinates = () => {
|
||||
const pattern = /\(at (-?[\d\.]*) (-?[\d\.]*) (-?[\d\.]*)\)/;
|
||||
const matches = p.at.match(pattern);
|
||||
if (matches && matches.length == 4) {
|
||||
return [parseFloat(matches[1]), parseFloat(matches[2]), parseFloat(matches[3])];
|
||||
} else {
|
||||
return null;
|
||||
}
|
||||
}
|
||||
|
||||
const adjust_point = (x, y) => {
|
||||
const at_l = get_at_coordinates();
|
||||
if(at_l == null) {
|
||||
throw new Error(
|
||||
`Could not get x and y coordinates from p.at: ${p.at}`
|
||||
);
|
||||
}
|
||||
const at_x = at_l[0];
|
||||
const at_y = at_l[1];
|
||||
const at_angle = at_l[2];
|
||||
const adj_x = at_x + x;
|
||||
const adj_y = at_y + y;
|
||||
|
||||
const radians = (Math.PI / 180) * at_angle,
|
||||
cos = Math.cos(radians),
|
||||
sin = Math.sin(radians),
|
||||
nx = (cos * (adj_x - at_x)) + (sin * (adj_y - at_y)) + at_x,
|
||||
ny = (cos * (adj_y - at_y)) - (sin * (adj_x - at_x)) + at_y;
|
||||
|
||||
const point_str = `${nx.toFixed(3)} ${ny.toFixed(3)}`;
|
||||
return point_str;
|
||||
}
|
||||
|
||||
let dst_nets = [
|
||||
p.CS.str,
|
||||
p.GND.str,
|
||||
p.VCC.str,
|
||||
p.SCK.str,
|
||||
p.MOSI.str,
|
||||
p.CS,
|
||||
p.GND,
|
||||
p.VCC,
|
||||
p.SCK,
|
||||
p.MOSI,
|
||||
];
|
||||
|
||||
local_nets = [
|
||||
p.local_net("1").str,
|
||||
p.local_net("2").str,
|
||||
p.VCC.str,
|
||||
p.local_net("4").str,
|
||||
p.local_net("5").str,
|
||||
p.local_net("1"),
|
||||
p.local_net("2"),
|
||||
p.VCC,
|
||||
p.local_net("4"),
|
||||
p.local_net("5"),
|
||||
];
|
||||
|
||||
let socket_nets = dst_nets;
|
||||
|
|
@ -113,15 +148,15 @@ module.exports = {
|
|||
(fp_line (start 4.23 ${14.9 + jumpers_offset}) (end 4.23 ${12.9 + jumpers_offset}) (layer F.Fab) (width 0.15))
|
||||
(fp_line (start 4.23 ${12.9 + jumpers_offset}) (end 5.93 ${12.9 + jumpers_offset}) (layer F.Fab) (width 0.15))
|
||||
|
||||
(pad 14 smd rect (at -5.08 ${13.45 + jumpers_offset} ${90 + p.rot}) (size 0.6 1.2) (layers F.Cu F.Mask) ${ jumpers_front_top[0] })
|
||||
(pad 15 smd rect (at -2.54 ${13.45 + jumpers_offset} ${90 + p.rot}) (size 0.6 1.2) (layers F.Cu F.Mask) ${ jumpers_front_top[1] })
|
||||
(pad 16 smd rect (at 2.54 ${13.45 + jumpers_offset} ${90 + p.rot}) (size 0.6 1.2) (layers F.Cu F.Mask) ${ jumpers_front_top[3] })
|
||||
(pad 17 smd rect (at 5.08 ${13.45 + jumpers_offset} ${90 + p.rot}) (size 0.6 1.2) (layers F.Cu F.Mask) ${ jumpers_front_top[4] })
|
||||
(pad 14 smd rect (at -5.08 ${13.45 + jumpers_offset} ${90 + p.rot}) (size 0.6 1.2) (layers F.Cu F.Mask) ${ jumpers_front_top[0].str })
|
||||
(pad 15 smd rect (at -2.54 ${13.45 + jumpers_offset} ${90 + p.rot}) (size 0.6 1.2) (layers F.Cu F.Mask) ${ jumpers_front_top[1].str })
|
||||
(pad 16 smd rect (at 2.54 ${13.45 + jumpers_offset} ${90 + p.rot}) (size 0.6 1.2) (layers F.Cu F.Mask) ${ jumpers_front_top[3].str })
|
||||
(pad 17 smd rect (at 5.08 ${13.45 + jumpers_offset} ${90 + p.rot}) (size 0.6 1.2) (layers F.Cu F.Mask) ${ jumpers_front_top[4].str})
|
||||
|
||||
(pad 10 smd rect (at -5.08 ${14.35 + jumpers_offset} ${90 + p.rot}) (size 0.6 1.2) (layers F.Cu F.Mask) ${ jumpers_front_bottom[0] })
|
||||
(pad 11 smd rect (at -2.54 ${14.35 + jumpers_offset} ${90 + p.rot}) (size 0.6 1.2) (layers F.Cu F.Mask) ${ jumpers_front_bottom[1] })
|
||||
(pad 12 smd rect (at 2.54 ${14.35 + jumpers_offset} ${90 + p.rot}) (size 0.6 1.2) (layers F.Cu F.Mask) ${ jumpers_front_bottom[3] })
|
||||
(pad 13 smd rect (at 5.08 ${14.35 + jumpers_offset} ${90 + p.rot}) (size 0.6 1.2) (layers F.Cu F.Mask) ${ jumpers_front_bottom[4] })
|
||||
(pad 10 smd rect (at -5.08 ${14.35 + jumpers_offset} ${90 + p.rot}) (size 0.6 1.2) (layers F.Cu F.Mask) ${ jumpers_front_bottom[0].str })
|
||||
(pad 11 smd rect (at -2.54 ${14.35 + jumpers_offset} ${90 + p.rot}) (size 0.6 1.2) (layers F.Cu F.Mask) ${ jumpers_front_bottom[1].str })
|
||||
(pad 12 smd rect (at 2.54 ${14.35 + jumpers_offset} ${90 + p.rot}) (size 0.6 1.2) (layers F.Cu F.Mask) ${ jumpers_front_bottom[3].str })
|
||||
(pad 13 smd rect (at 5.08 ${14.35 + jumpers_offset} ${90 + p.rot}) (size 0.6 1.2) (layers F.Cu F.Mask) ${ jumpers_front_bottom[4].str })
|
||||
`
|
||||
|
||||
const back = `
|
||||
|
|
@ -161,15 +196,15 @@ module.exports = {
|
|||
(fp_line (start 5.93 ${12.9 + jumpers_offset}) (end 4.23 ${12.9 + jumpers_offset}) (layer B.Fab) (width 0.15))
|
||||
(fp_line (start 4.23 ${12.9 + jumpers_offset}) (end 4.23 ${14.9 + jumpers_offset}) (layer B.Fab) (width 0.15))
|
||||
|
||||
(pad 24 smd rect (at 5.08 ${13.45 + jumpers_offset} ${270 + p.rot}) (size 0.6 1.2) (layers B.Cu B.Mask) ${ jumpers_back_top[0] })
|
||||
(pad 25 smd rect (at 2.54 ${13.45 + jumpers_offset} ${270 + p.rot}) (size 0.6 1.2) (layers B.Cu B.Mask) ${ jumpers_back_top[1] })
|
||||
(pad 26 smd rect (at -2.54 ${13.45 + jumpers_offset} ${270 + p.rot}) (size 0.6 1.2) (layers B.Cu B.Mask) ${ jumpers_back_top[3] })
|
||||
(pad 27 smd rect (at -5.08 ${13.45 + jumpers_offset} ${270 + p.rot}) (size 0.6 1.2) (layers B.Cu B.Mask) ${ jumpers_back_top[4] })
|
||||
(pad 24 smd rect (at 5.08 ${13.45 + jumpers_offset} ${270 + p.rot}) (size 0.6 1.2) (layers B.Cu B.Mask) ${ jumpers_back_top[0].str })
|
||||
(pad 25 smd rect (at 2.54 ${13.45 + jumpers_offset} ${270 + p.rot}) (size 0.6 1.2) (layers B.Cu B.Mask) ${ jumpers_back_top[1].str })
|
||||
(pad 26 smd rect (at -2.54 ${13.45 + jumpers_offset} ${270 + p.rot}) (size 0.6 1.2) (layers B.Cu B.Mask) ${ jumpers_back_top[3].str })
|
||||
(pad 27 smd rect (at -5.08 ${13.45 + jumpers_offset} ${270 + p.rot}) (size 0.6 1.2) (layers B.Cu B.Mask) ${ jumpers_back_top[4].str })
|
||||
|
||||
(pad 20 smd rect (at 5.08 ${14.35 + jumpers_offset} ${270 + p.rot}) (size 0.6 1.2) (layers B.Cu B.Mask) ${ jumpers_back_bottom[0] })
|
||||
(pad 21 smd rect (at 2.54 ${14.35 + jumpers_offset} ${270 + p.rot}) (size 0.6 1.2) (layers B.Cu B.Mask) ${ jumpers_back_bottom[1] })
|
||||
(pad 22 smd rect (at -2.54 ${14.35 + jumpers_offset} ${270 + p.rot}) (size 0.6 1.2) (layers B.Cu B.Mask) ${ jumpers_back_bottom[3] })
|
||||
(pad 23 smd rect (at -5.08 ${14.35 + jumpers_offset} ${270 + p.rot}) (size 0.6 1.2) (layers B.Cu B.Mask) ${ jumpers_back_bottom[4] })
|
||||
(pad 20 smd rect (at 5.08 ${14.35 + jumpers_offset} ${270 + p.rot}) (size 0.6 1.2) (layers B.Cu B.Mask) ${ jumpers_back_bottom[0].str })
|
||||
(pad 21 smd rect (at 2.54 ${14.35 + jumpers_offset} ${270 + p.rot}) (size 0.6 1.2) (layers B.Cu B.Mask) ${ jumpers_back_bottom[1].str })
|
||||
(pad 22 smd rect (at -2.54 ${14.35 + jumpers_offset} ${270 + p.rot}) (size 0.6 1.2) (layers B.Cu B.Mask) ${ jumpers_back_bottom[3].str })
|
||||
(pad 23 smd rect (at -5.08 ${14.35 + jumpers_offset} ${270 + p.rot}) (size 0.6 1.2) (layers B.Cu B.Mask) ${ jumpers_back_bottom[4].str })
|
||||
`
|
||||
|
||||
const labels = `
|
||||
|
|
@ -206,11 +241,11 @@ module.exports = {
|
|||
`
|
||||
|
||||
const bottom = `
|
||||
(pad 1 thru_hole oval (at -5.08 16.7 ${270 + p.rot}) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) ${ socket_nets[0] })
|
||||
(pad 2 thru_hole oval (at -2.54 16.7 ${270 + p.rot}) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) ${ socket_nets[1] })
|
||||
(pad 3 thru_hole oval (at 0 16.7 ${270 + p.rot}) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) ${ socket_nets[2] })
|
||||
(pad 4 thru_hole oval (at 2.54 16.7 ${270 + p.rot}) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) ${ socket_nets[3] })
|
||||
(pad 5 thru_hole circle (at 5.08 16.7 ${270 + p.rot}) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) ${ socket_nets[4] })
|
||||
(pad 1 thru_hole oval (at -5.08 16.7 ${270 + p.rot}) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) ${ socket_nets[0].str })
|
||||
(pad 2 thru_hole oval (at -2.54 16.7 ${270 + p.rot}) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) ${ socket_nets[1].str })
|
||||
(pad 3 thru_hole oval (at 0 16.7 ${270 + p.rot}) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) ${ socket_nets[2].str })
|
||||
(pad 4 thru_hole oval (at 2.54 16.7 ${270 + p.rot}) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) ${ socket_nets[3].str })
|
||||
(pad 5 thru_hole circle (at 5.08 16.7 ${270 + p.rot}) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) ${ socket_nets[4].str })
|
||||
|
||||
(fp_line (start 5.4 13.4) (end 5.4 -11.9) (layer Dwgs.User) (width 0.15))
|
||||
(fp_line (start -5.4 13.4) (end -5.4 -11.9) (layer Dwgs.User) (width 0.15))
|
||||
|
|
@ -219,6 +254,28 @@ module.exports = {
|
|||
)
|
||||
`
|
||||
|
||||
const traces_bottom = `
|
||||
(segment (start ${ adjust_point(-5.08, 16.7)}) (end ${ adjust_point(-5.08, 19.15)}) (width ${p.trace_width}) (layer "F.Cu") (net ${jumpers_front_bottom[0].index}))
|
||||
(segment (start ${ adjust_point(-2.54, 16.7)}) (end ${ adjust_point(-2.54, 19.15)}) (width ${p.gnd_trace_width}) (layer "F.Cu") (net ${jumpers_front_bottom[1].index}))
|
||||
(segment (start ${ adjust_point(2.54, 16.7)}) (end ${ adjust_point(2.54, 19.15)}) (width ${p.trace_width}) (layer "F.Cu") (net ${jumpers_front_bottom[3].index}))
|
||||
(segment (start ${ adjust_point(5.08, 16.7)}) (end ${ adjust_point(5.08, 19.15)}) (width ${p.trace_width}) (layer "F.Cu") (net ${jumpers_front_bottom[4].index}))
|
||||
(segment (start ${ adjust_point(-5.08, 16.7)}) (end ${ adjust_point(-5.08, 19.15)}) (width ${p.trace_width}) (layer "B.Cu") (net ${jumpers_back_bottom[0].index}))
|
||||
(segment (start ${ adjust_point(-2.54, 16.7)}) (end ${ adjust_point(-2.54, 19.15)}) (width ${p.trace_width}) (layer "B.Cu") (net ${jumpers_back_bottom[1].index}))
|
||||
(segment (start ${ adjust_point(2.54, 16.7)}) (end ${ adjust_point(2.54, 19.15)}) (width ${p.gnd_trace_width}) (layer "B.Cu") (net ${jumpers_back_bottom[3].index}))
|
||||
(segment (start ${ adjust_point(5.08, 16.7)}) (end ${ adjust_point(5.08, 19.15)}) (width ${p.trace_width}) (layer "B.Cu") (net ${jumpers_back_bottom[4].index}))
|
||||
`
|
||||
|
||||
const traces_top = `
|
||||
(segment (start ${ adjust_point(-5.08, 16.7)}) (end ${ adjust_point(-5.08, 14.25)}) (width ${p.trace_width}) (layer "F.Cu") (net ${jumpers_front_top[0].index}))
|
||||
(segment (start ${ adjust_point(-2.54, 16.7)}) (end ${ adjust_point(-2.54, 14.25)}) (width ${p.gnd_trace_width}) (layer "F.Cu") (net ${jumpers_front_top[1].index}))
|
||||
(segment (start ${ adjust_point(2.54, 16.7)}) (end ${ adjust_point(2.54, 14.25)}) (width ${p.trace_width}) (layer "F.Cu") (net ${jumpers_front_top[3].index}))
|
||||
(segment (start ${ adjust_point(5.08, 16.7)}) (end ${ adjust_point(5.08, 14.25)}) (width ${p.trace_width}) (layer "F.Cu") (net ${jumpers_front_top[4].index}))
|
||||
(segment (start ${ adjust_point(-5.08, 16.7)}) (end ${ adjust_point(-5.08, 14.25)}) (width ${p.trace_width}) (layer "B.Cu") (net ${jumpers_back_top[0].index}))
|
||||
(segment (start ${ adjust_point(-2.54, 16.7)}) (end ${ adjust_point(-2.54, 14.25)}) (width ${p.trace_width}) (layer "B.Cu") (net ${jumpers_back_top[1].index}))
|
||||
(segment (start ${ adjust_point(2.54, 16.7)}) (end ${ adjust_point(2.54, 14.25)}) (width ${p.gnd_trace_width}) (layer "B.Cu") (net ${jumpers_back_top[3].index}))
|
||||
(segment (start ${ adjust_point(5.08, 16.7)}) (end ${ adjust_point(5.08, 14.25)}) (width ${p.trace_width}) (layer "B.Cu") (net ${jumpers_back_top[4].index}))
|
||||
`
|
||||
|
||||
let final = top;
|
||||
|
||||
if(p.side == "F" || p.reversible) {
|
||||
|
|
@ -239,6 +296,14 @@ module.exports = {
|
|||
|
||||
final += bottom;
|
||||
|
||||
if(p.traces && p.reversible) {
|
||||
if(p.jumpers_at_bottom) {
|
||||
final += traces_bottom;
|
||||
} else {
|
||||
final += traces_top;
|
||||
}
|
||||
}
|
||||
|
||||
return final;
|
||||
}
|
||||
}
|
||||
Loading…
Reference in New Issue