kibot:
  version: 1

preflight:
  run_erc: false  # There are no sch files generated by Ergogen
  drc:
    dir: kibot/drc
    enabled: true
    ignore_unconnected: true  # Auto-routing doesn't always connect all traces
    filters:
      - filter: 'Ignore library warnings'
        error: 'lib_footprint_issues'
      - filter: 'Copper edge clearance should be >=0.200 but board defaults to 0.500'
        error: 'copper_edge_clearance'
        regex:  'actual 0.[2-9][0-9]+ mm'
      - filter: 'Ignore Default track width issues, board defaults to 0.250 but JLCPCB min is 0.127'
        error: 'track_width'
        regex:  'min width 0.2000 mm; actual 0.1[2-9][07-9]0 mm'
      - filter: 'Hotswap reversible switch footprint has holes overlapping'
        error: 'hole_near_hole'
      - filter: 'Hotswap reversible switch footprint has pad overlapping with hole'
        error: 'hole_clearance'
      - filter: 'Hotswap reversible switch footprint has pad overlapping with hole'
        error: 'solder_mask_bridge'
      - filter: 'Jumpers on the MCU are supposed to short different nets'
        error: 'shorting_items'
      - filter: 'MX reversible hotswap has co-located drill holes'
        error: 'holes_co_located'
  fill_zones: true

global:
  filters:
    - number: 8
      regex: 'Unable to find KiCad configuration file'
    - number: 10
      regex: 'Unable to find KiCad user templates'
    - number: 10
      regex: 'Unable to find KiCad 3D models'
    - number: 58
      regex: 'KiCad project file not found|Missing KiCad main config file'
    - number: 58
      regex: 'copper_edge_clearance'
    - number: 58
      regex: 'track_width'
    - number: 58
      regex: 'hole_near_hole'
    - number: 58
      regex: 'hole_clearance'
    - number: 58
      regex: 'shorting_items'
    - number: 58
      regex: 'solder_mask_bridge'

import:
  - ./default.kibot.yaml