448 lines
20 KiB
JavaScript
448 lines
20 KiB
JavaScript
// Author: @infused-kim + @ceoloide improvements
|
|
//
|
|
// A reversible footprint for the nice!nano (or any pro-micro compatible
|
|
// controller) that uses jumpers instead of two rows socket rows to achieve
|
|
// reversablity.
|
|
//
|
|
// This is a re-implementation of the promicro_pretty footprint made popular
|
|
// by @benvallack.
|
|
//
|
|
// @infused-kim's improvements:
|
|
// - It uses real traces instead of pads, which gets rid of hundreds of DRC errors.
|
|
// - It leaves more space between the vias to allow easier routing through the middle
|
|
// of the footprint
|
|
//
|
|
// @ceoloide's improvements:
|
|
// - Move vias closer to the pads
|
|
//
|
|
// # Placement and jumper soldering:
|
|
// The footprint is meant to be used with a nice!nano (or any other pro micro
|
|
// compatible board) that is placed on the top side of the PCB with the
|
|
// components facing down.
|
|
//
|
|
// This means when you look down at it, the RAW pin is in the upper left
|
|
// corner and the 006 pin in the upper right corner.
|
|
//
|
|
// To make it work in this configuration, you solder the jumpers on the
|
|
// OPPOSITE side.
|
|
//
|
|
// Due to the way how this footprint works, you can also place it with the
|
|
// components facing up or even at the bottom. You just need to make sure you
|
|
// solder the jumpers on the correct side.
|
|
//
|
|
// The silkscreen labels are displayed on the opposite side of the MCU, when
|
|
// it's facing down. This is so that one can solder all components and jumpers
|
|
// on the back side, and be able to read the correct labels to do tests.
|
|
//
|
|
// # Further credits
|
|
// This footprint was created from scratch, but is based on the ideas from
|
|
// these footprints:
|
|
// https://github.com/Albert-IV/ergogen-contrib/blob/main/src/footprints/promicro_pretty.js
|
|
// https://github.com/50an6xy06r6n/keyboard_reversible.pretty
|
|
|
|
module.exports = {
|
|
params: {
|
|
designator: 'MCU',
|
|
traces: true,
|
|
RAW: {type: 'net', value: 'RAW'},
|
|
GND: {type: 'net', value: 'GND'},
|
|
RST: {type: 'net', value: 'RST'},
|
|
VCC: {type: 'net', value: 'VCC'},
|
|
P21: {type: 'net', value: 'P21'},
|
|
P20: {type: 'net', value: 'P20'},
|
|
P19: {type: 'net', value: 'P19'},
|
|
P18: {type: 'net', value: 'P18'},
|
|
P15: {type: 'net', value: 'P15'},
|
|
P14: {type: 'net', value: 'P14'},
|
|
P16: {type: 'net', value: 'P16'},
|
|
P10: {type: 'net', value: 'P10'},
|
|
|
|
P1: {type: 'net', value: 'P1'},
|
|
P0: {type: 'net', value: 'P0'},
|
|
P2: {type: 'net', value: 'P2'},
|
|
P3: {type: 'net', value: 'P3'},
|
|
P4: {type: 'net', value: 'P4'},
|
|
P5: {type: 'net', value: 'P5'},
|
|
P6: {type: 'net', value: 'P6'},
|
|
P7: {type: 'net', value: 'P7'},
|
|
P8: {type: 'net', value: 'P8'},
|
|
P9: {type: 'net', value: 'P9'},
|
|
|
|
show_instructions: true,
|
|
show_silk_labels: true,
|
|
show_via_labels: true,
|
|
via_size: 0.8, // JLCPC min is 0.56 for 1-2 layer boards, KiCad defaults to 0.8
|
|
via_drill: 0.4, // JLCPC min is 0.3 for 1-2 layer boards, KiCad defaults to 0.4
|
|
|
|
RAW_label: '',
|
|
GND_label: '',
|
|
RST_label: '',
|
|
VCC_label: '',
|
|
P21_label: '',
|
|
P20_label: '',
|
|
P19_label: '',
|
|
P18_label: '',
|
|
P15_label: '',
|
|
P14_label: '',
|
|
P16_label: '',
|
|
P10_label: '',
|
|
|
|
P1_label: '',
|
|
P0_label: '',
|
|
P2_label: '',
|
|
P3_label: '',
|
|
P4_label: '',
|
|
P5_label: '',
|
|
P6_label: '',
|
|
P7_label: '',
|
|
P8_label: '',
|
|
P9_label: '',
|
|
},
|
|
body: p => {
|
|
const get_pin_net_name = (p, pin_name) => {
|
|
return p[pin_name].name;
|
|
};
|
|
|
|
const get_pin_net_str = (p, pin_name) => {
|
|
return p[pin_name].str;
|
|
};
|
|
|
|
const get_pin_label_override = (p, pin_name) => {
|
|
prop_name = `${pin_name}_label`;
|
|
return p[prop_name];
|
|
};
|
|
|
|
const get_pin_label = (p, pin_name) => {
|
|
label = get_pin_label_override(p, pin_name);
|
|
if(label == '') {
|
|
label = get_pin_net_name(p, pin_name);
|
|
}
|
|
|
|
if(label === undefined) {
|
|
label = '""';
|
|
}
|
|
|
|
return label;
|
|
};
|
|
|
|
const get_at_coordinates = () => {
|
|
const pattern = /\(at (-?[\d\.]*) (-?[\d\.]*) (-?[\d\.]*)\)/;
|
|
const matches = p.at.match(pattern);
|
|
if (matches && matches.length == 4) {
|
|
return [parseFloat(matches[1]), parseFloat(matches[2]), parseFloat(matches[3])];
|
|
} else {
|
|
return null;
|
|
}
|
|
}
|
|
|
|
const adjust_point = (x, y) => {
|
|
const at_l = get_at_coordinates();
|
|
if(at_l == null) {
|
|
throw new Error(
|
|
`Could not get x and y coordinates from p.at: ${p.at}`
|
|
);
|
|
}
|
|
const at_x = at_l[0];
|
|
const at_y = at_l[1];
|
|
const at_angle = at_l[2];
|
|
const adj_x = at_x + x;
|
|
const adj_y = at_y + y;
|
|
|
|
const radians = (Math.PI / 180) * at_angle,
|
|
cos = Math.cos(radians),
|
|
sin = Math.sin(radians),
|
|
nx = (cos * (adj_x - at_x)) + (sin * (adj_y - at_y)) + at_x,
|
|
ny = (cos * (adj_y - at_y)) - (sin * (adj_x - at_x)) + at_y;
|
|
|
|
const point_str = `${nx.toFixed(3)} ${ny.toFixed(3)}`;
|
|
return point_str;
|
|
}
|
|
|
|
const gen_traces_row = (row_num) => {
|
|
const traces = `
|
|
(segment (start ${ adjust_point(4.775, -12.7 + (row_num * 2.54)) }) (end ${ adjust_point(3.4, -12.7 + (row_num * 2.54)) }) (width 0.25) (layer F.Cu) (net 1))
|
|
(segment (start ${ adjust_point(-4.775, -12.7 + (row_num * 2.54)) }) (end ${ adjust_point(-3.4, -12.7 + (row_num * 2.54)) }) (width 0.25) (layer F.Cu) (net 13))
|
|
|
|
(segment (start ${ adjust_point(-7.62, -12.7 + (row_num * 2.54)) }) (end ${ adjust_point(-5.5, -12.7 + (row_num * 2.54)) }) (width 0.25) (layer F.Cu) (net 23))
|
|
(segment (start ${ adjust_point(-7.62, -12.7 + (row_num * 2.54)) }) (end ${ adjust_point(-5.5, -12.7 + (row_num * 2.54)) }) (width 0.25) (layer B.Cu) (net 23))
|
|
(segment (start ${ adjust_point(5.5, -12.7 + (row_num * 2.54)) }) (end ${ adjust_point(7.62, -12.7 + (row_num * 2.54)) }) (width 0.25) (layer F.Cu) (net 24))
|
|
(segment (start ${ adjust_point(7.62, -12.7 + (row_num * 2.54)) }) (end ${ adjust_point(5.5, -12.7 + (row_num * 2.54)) }) (width 0.25) (layer B.Cu) (net 24))
|
|
|
|
(segment (start ${ adjust_point(-2.604695, 0.23 + (row_num * 2.54) - 12.7) }) (end ${ adjust_point(3.17, 0.23 + (row_num * 2.54) - 12.7) }) (width 0.25) (layer "B.Cu") (net 2))
|
|
(segment (start ${ adjust_point(-4.775, 0 + (row_num * 2.54) - 12.7) }) (end ${ adjust_point(-4.425305, 0 + (row_num * 2.54) - 12.7) }) (width 0.25) (layer "B.Cu") (net 2))
|
|
(segment (start ${ adjust_point(-3.700305, 0.725 + (row_num * 2.54) - 12.7) }) (end ${ adjust_point(-3.099695, 0.725 + (row_num * 2.54) - 12.7) }) (width 0.25) (layer "B.Cu") (net 2))
|
|
(segment (start ${ adjust_point(-4.425305, 0 + (row_num * 2.54) - 12.7) }) (end ${ adjust_point(-3.700305, 0.725 + (row_num * 2.54) - 12.7) }) (width 0.25) (layer "B.Cu") (net 2))
|
|
(segment (start ${ adjust_point(-3.099695, 0.725 + (row_num * 2.54) - 12.7) }) (end ${ adjust_point(-2.604695, 0.23 + (row_num * 2.54) - 12.7) }) (width 0.25) (layer "B.Cu") (net 2))
|
|
|
|
(segment (start ${ adjust_point(4.775, 0 + (row_num * 2.54) - 12.7) }) (end ${ adjust_point(4.425305, 0 + (row_num * 2.54) - 12.7) }) (width 0.25) (layer "B.Cu") (net 20))
|
|
(segment (start ${ adjust_point(2.594695, -0.22 + (row_num * 2.54) - 12.7) }) (end ${ adjust_point(-3.18, -0.22 + (row_num * 2.54) - 12.7) }) (width 0.25) (layer "B.Cu") (net 20))
|
|
(segment (start ${ adjust_point(4.425305, 0 + (row_num * 2.54) - 12.7) }) (end ${ adjust_point(3.700305, -0.725 + (row_num * 2.54) - 12.7) }) (width 0.25) (layer "B.Cu") (net 20))
|
|
(segment (start ${ adjust_point(3.700305, -0.725 + (row_num * 2.54) - 12.7) }) (end ${ adjust_point(3.099695, -0.725 + (row_num * 2.54) - 12.7) }) (width 0.25) (layer "B.Cu") (net 20))
|
|
(segment (start ${ adjust_point(3.099695, -0.725 + (row_num * 2.54) - 12.7) }) (end ${ adjust_point(2.594695, -0.22 + (row_num * 2.54) - 12.7) }) (width 0.25) (layer "B.Cu") (net 20))
|
|
`
|
|
|
|
return traces
|
|
}
|
|
|
|
const gen_traces = () => {
|
|
let traces = '';
|
|
for (let i = 0; i < 12; i++) {
|
|
row_traces = gen_traces_row(i)
|
|
traces += row_traces
|
|
}
|
|
|
|
return traces
|
|
}
|
|
|
|
const gen_socket_row = (row_num, pin_name_left, pin_name_right, show_via_labels, show_silk_labels) => {
|
|
const row_offset_y = 2.54 * row_num
|
|
|
|
const socket_hole_num_left = 24 - row_num
|
|
const socket_hole_num_right = 1 + row_num
|
|
const via_num_left = 124 - row_num
|
|
const via_num_right = 1 + row_num
|
|
|
|
const net_left = get_pin_net_str(p, pin_name_left)
|
|
const net_right = get_pin_net_str(p, pin_name_right)
|
|
const via_label_left = get_pin_label(p, pin_name_left)
|
|
const via_label_right = get_pin_label(p, pin_name_right)
|
|
|
|
// These are the silkscreen labels that will be printed on the PCB.
|
|
// They tell us the orientation if the controller is placed with
|
|
// the components down, on top of the PCB and the jumpers are
|
|
// soldered on the opposite side than the controller, when seen on
|
|
// the opposite side of the controller.
|
|
const net_silk_front_left = via_label_left
|
|
const net_silk_front_right = via_label_right
|
|
const net_silk_back_left = via_label_right
|
|
const net_silk_back_right = via_label_left
|
|
|
|
let socket_row = `
|
|
${''/* Socket Holes */}
|
|
(pad ${socket_hole_num_left} thru_hole circle (at -7.62 ${-12.7 + row_offset_y}) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) ${p.local_net(socket_hole_num_left).str})
|
|
(pad ${socket_hole_num_right} thru_hole circle (at 7.62 ${-12.7 + row_offset_y}) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) ${p.local_net(socket_hole_num_right).str})
|
|
|
|
${''/* Inside VIAS */}
|
|
(pad ${via_num_right} thru_hole circle (at 3.4 ${-12.7 + row_offset_y}) (size ${p.via_size} ${p.via_size}) (drill ${p.via_drill}) (layers *.Cu *.Mask) ${net_right})
|
|
(pad ${via_num_left} thru_hole circle (at -3.4 ${-12.7 + row_offset_y}) (size ${p.via_size} ${p.via_size}) (drill ${p.via_drill}) (layers *.Cu *.Mask) ${net_left})
|
|
|
|
${''/* Jumper Pads - Front Left */}
|
|
(pad ${socket_hole_num_left} smd custom (at -5.5 ${-12.7 + row_offset_y}) (size 0.2 0.2) (layers F.Cu F.Mask) ${p.local_net(socket_hole_num_left).str}
|
|
(zone_connect 2)
|
|
(options (clearance outline) (anchor rect))
|
|
(primitives
|
|
(gr_poly (pts
|
|
(xy -0.5 -0.625) (xy -0.25 -0.625) (xy 0.25 0) (xy -0.25 0.625) (xy -0.5 0.625)
|
|
) (width 0))
|
|
))
|
|
(pad ${via_num_left} smd custom (at -4.775 ${-12.7 + row_offset_y}) (size 0.2 0.2) (layers F.Cu F.Mask) ${net_left}
|
|
(zone_connect 2)
|
|
(options (clearance outline) (anchor rect))
|
|
(primitives
|
|
(gr_poly (pts
|
|
(xy -0.65 -0.625) (xy 0.5 -0.625) (xy 0.5 0.625) (xy -0.65 0.625) (xy -0.15 0)
|
|
) (width 0))
|
|
))
|
|
|
|
${''/* Jumper Pads - Front Right */}
|
|
(pad ${via_num_right} smd custom (at 4.775 ${-12.7 + row_offset_y} 180) (size 0.2 0.2) (layers F.Cu F.Mask) ${net_right}
|
|
(zone_connect 2)
|
|
(options (clearance outline) (anchor rect))
|
|
(primitives
|
|
(gr_poly (pts
|
|
(xy -0.65 -0.625) (xy 0.5 -0.625) (xy 0.5 0.625) (xy -0.65 0.625) (xy -0.15 0)
|
|
) (width 0))
|
|
))
|
|
(pad ${socket_hole_num_right} smd custom (at 5.5 ${-12.7 + row_offset_y} 180) (size 0.2 0.2) (layers F.Cu F.Mask) ${p.local_net(socket_hole_num_right).str}
|
|
(zone_connect 2)
|
|
(options (clearance outline) (anchor rect))
|
|
(primitives
|
|
(gr_poly (pts
|
|
(xy -0.5 -0.625) (xy -0.25 -0.625) (xy 0.25 0) (xy -0.25 0.625) (xy -0.5 0.625)
|
|
) (width 0))
|
|
))
|
|
|
|
${''/* Jumper Pads - Back Left */}
|
|
(pad ${socket_hole_num_left} smd custom (at -5.5 ${-12.7 + row_offset_y}) (size 0.2 0.2) (layers B.Cu B.Mask) ${p.local_net(socket_hole_num_left).str}
|
|
(zone_connect 2)
|
|
(options (clearance outline) (anchor rect))
|
|
(primitives
|
|
(gr_poly (pts
|
|
(xy -0.5 0.625) (xy -0.25 0.625) (xy 0.25 0) (xy -0.25 -0.625) (xy -0.5 -0.625)
|
|
) (width 0))
|
|
))
|
|
|
|
(pad ${via_num_right} smd custom (at -4.775 ${-12.7 + row_offset_y}) (size 0.2 0.2) (layers B.Cu B.Mask) ${net_right}
|
|
(zone_connect 2)
|
|
(options (clearance outline) (anchor rect))
|
|
(primitives
|
|
(gr_poly (pts
|
|
(xy -0.65 0.625) (xy 0.5 0.625) (xy 0.5 -0.625) (xy -0.65 -0.625) (xy -0.15 0)
|
|
) (width 0))
|
|
))
|
|
|
|
${''/* Jumper Pads - Back Right */}
|
|
(pad ${via_num_left} smd custom (at 4.775 ${-12.7 + row_offset_y} 180) (size 0.2 0.2) (layers B.Cu B.Mask) ${net_left}
|
|
(zone_connect 2)
|
|
(options (clearance outline) (anchor rect))
|
|
(primitives
|
|
(gr_poly (pts
|
|
(xy -0.65 0.625) (xy 0.5 0.625) (xy 0.5 -0.625) (xy -0.65 -0.625) (xy -0.15 0)
|
|
) (width 0))
|
|
))
|
|
(pad ${socket_hole_num_right} smd custom (at 5.5 ${-12.7 + row_offset_y} 180) (size 0.2 0.2) (layers B.Cu B.Mask) ${p.local_net(socket_hole_num_right).str}
|
|
(zone_connect 2)
|
|
(options (clearance outline) (anchor rect))
|
|
(primitives
|
|
(gr_poly (pts
|
|
(xy -0.5 0.625) (xy -0.25 0.625) (xy 0.25 0) (xy -0.25 -0.625) (xy -0.5 -0.625)
|
|
) (width 0))
|
|
))
|
|
`
|
|
|
|
if(show_silk_labels == true) {
|
|
socket_row += `
|
|
|
|
${''/* Silkscreen Labels - Front */}
|
|
(fp_text user ${net_silk_front_left} (at -3 ${-12.7 + row_offset_y}) (layer F.SilkS)
|
|
(effects (font (size 1 1) (thickness 0.15)) (justify left))
|
|
)
|
|
(fp_text user ${net_silk_front_right} (at 3 ${-12.7 + row_offset_y}) (layer F.SilkS)
|
|
(effects (font (size 1 1) (thickness 0.15)) (justify right))
|
|
)
|
|
|
|
${''/* Silkscreen Labels - Back */}
|
|
(fp_text user ${net_silk_back_left} (at -3 ${-12.7 + row_offset_y} 180) (layer B.SilkS)
|
|
(effects (font (size 1 1) (thickness 0.15)) (justify right mirror))
|
|
)
|
|
(fp_text user ${net_silk_back_right} (at 3 ${-12.7 + row_offset_y} 180) (layer B.SilkS)
|
|
(effects (font (size 1 1) (thickness 0.15)) (justify left mirror))
|
|
)
|
|
`
|
|
}
|
|
|
|
if(show_via_labels == true) {
|
|
socket_row += `
|
|
${''/* Via Labels - Front */}
|
|
(fp_text user ${via_label_left} (at -3.262 ${-13.5 + row_offset_y}) (layer F.Fab)
|
|
(effects (font (size 0.5 0.5) (thickness 0.08)))
|
|
)
|
|
(fp_text user ${via_label_right} (at 3.262 ${-13.5 + row_offset_y}) (layer F.Fab)
|
|
(effects (font (size 0.5 0.5) (thickness 0.08)))
|
|
)
|
|
|
|
${''/* Via Labels - Back */}
|
|
(fp_text user ${via_label_left} (at -3.262 ${-13.5 + row_offset_y} 180) (layer B.Fab)
|
|
(effects (font (size 0.5 0.5) (thickness 0.08)) (justify mirror))
|
|
)
|
|
(fp_text user ${via_label_right} (at 3.262 ${-13.5 + row_offset_y} 180) (layer B.Fab)
|
|
(effects (font (size 0.5 0.5) (thickness 0.08)) (justify mirror))
|
|
)
|
|
`
|
|
}
|
|
|
|
return socket_row
|
|
}
|
|
|
|
const gen_socket_rows = (show_via_labels, show_silk_labels) => {
|
|
const pin_names = [
|
|
['P1', 'RAW'],
|
|
['P0', 'GND'],
|
|
['GND', 'RST'],
|
|
['GND', 'VCC'],
|
|
['P2', 'P21'],
|
|
['P3', 'P20'],
|
|
['P4', 'P19'],
|
|
['P5', 'P18'],
|
|
['P6', 'P15'],
|
|
['P7', 'P14'],
|
|
['P8', 'P16'],
|
|
['P9', 'P10'],
|
|
]
|
|
let socket_rows = '';
|
|
for (let i = 0; i < pin_names.length; i++) {
|
|
pin_name_left = pin_names[i][0]
|
|
pin_name_right = pin_names[i][1]
|
|
|
|
const socket_row = gen_socket_row(
|
|
i, pin_name_left, pin_name_right,
|
|
show_via_labels, show_silk_labels
|
|
)
|
|
|
|
socket_rows += socket_row
|
|
}
|
|
|
|
return socket_rows
|
|
}
|
|
|
|
const common_top = `
|
|
(module nice_nano (layer F.Cu) (tedit 6451A4F1)
|
|
(attr virtual)
|
|
${p.at /* parametric position */}
|
|
(fp_text reference "${p.ref}" (at 0 -15) (layer F.SilkS) ${p.ref_hide}
|
|
(effects (font (size 1 1) (thickness 0.15)))
|
|
)
|
|
|
|
${''/* USB Socket Outline */}
|
|
(fp_line (start 3.556 -18.034) (end 3.556 -16.51) (layer Dwgs.User) (width 0.15))
|
|
(fp_line (start -3.81 -16.51) (end -3.81 -18.034) (layer Dwgs.User) (width 0.15))
|
|
(fp_line (start -3.81 -18.034) (end 3.556 -18.034) (layer Dwgs.User) (width 0.15))
|
|
|
|
|
|
${''/* Controller top part outline */}
|
|
(fp_line (start -8.89 -16.51) (end 8.89 -16.51) (layer F.Fab) (width 0.12))
|
|
(fp_line (start -8.89 -16.51) (end -8.89 -14) (layer F.Fab) (width 0.12))
|
|
(fp_line (start 8.89 -16.51) (end 8.89 -14) (layer F.Fab) (width 0.12))
|
|
(fp_line (start -8.89 -16.5) (end -8.89 -13.99) (layer B.Fab) (width 0.12))
|
|
(fp_line (start 8.89 -16.51) (end 8.89 -14) (layer B.Fab) (width 0.12))
|
|
(fp_line (start -8.89 -16.51) (end 8.89 -16.51) (layer B.Fab) (width 0.12))
|
|
|
|
${''/* Socket outlines */}
|
|
(fp_line (start 6.29 -11.43) (end 8.95 -11.43) (layer F.SilkS) (width 0.12))
|
|
(fp_line (start 6.29 -14.03) (end 8.95 -14.03) (layer F.SilkS) (width 0.12))
|
|
(fp_line (start 6.29 -14.03) (end 6.29 16.57) (layer F.SilkS) (width 0.12))
|
|
(fp_line (start 6.29 16.57) (end 8.95 16.57) (layer F.SilkS) (width 0.12))
|
|
(fp_line (start 8.95 -14.03) (end 8.95 16.57) (layer F.SilkS) (width 0.12))
|
|
(fp_line (start -8.95 -14.03) (end -6.29 -14.03) (layer F.SilkS) (width 0.12))
|
|
(fp_line (start -8.95 -14.03) (end -8.95 16.57) (layer F.SilkS) (width 0.12))
|
|
(fp_line (start -8.95 16.57) (end -6.29 16.57) (layer F.SilkS) (width 0.12))
|
|
(fp_line (start -6.29 -14.03) (end -6.29 16.57) (layer F.SilkS) (width 0.12))
|
|
(fp_line (start -8.95 -11.43) (end -6.29 -11.43) (layer B.SilkS) (width 0.12))
|
|
(fp_line (start -6.29 -14.03) (end -8.95 -14.03) (layer B.SilkS) (width 0.12))
|
|
(fp_line (start -6.29 -14.03) (end -6.29 16.57) (layer B.SilkS) (width 0.12))
|
|
(fp_line (start -6.29 16.57) (end -8.95 16.57) (layer B.SilkS) (width 0.12))
|
|
(fp_line (start -8.95 -14.03) (end -8.95 16.57) (layer B.SilkS) (width 0.12))
|
|
(fp_line (start 8.95 -14.03) (end 6.29 -14.03) (layer B.SilkS) (width 0.12))
|
|
(fp_line (start 8.95 -14.03) (end 8.95 16.57) (layer B.SilkS) (width 0.12))
|
|
(fp_line (start 8.95 16.57) (end 6.29 16.57) (layer B.SilkS) (width 0.12))
|
|
(fp_line (start 6.29 -14.03) (end 6.29 16.57) (layer B.SilkS) (width 0.12))
|
|
`;
|
|
|
|
const instructions = `
|
|
(fp_text user "R. Side - Jumper Here" (at 0 -15.245) (layer F.SilkS)
|
|
(effects (font (size 1 1) (thickness 0.15)))
|
|
)
|
|
(fp_text user "L. Side - Jumper Here" (at 0 -15.245) (layer B.SilkS)
|
|
(effects (font (size 1 1) (thickness 0.15)) (justify mirror))
|
|
)
|
|
`
|
|
|
|
const socket_rows = gen_socket_rows(
|
|
p.show_via_labels, p.show_silk_labels
|
|
)
|
|
const traces = gen_traces()
|
|
|
|
|
|
return `
|
|
${''/* Controller*/}
|
|
${ common_top }
|
|
${ socket_rows }
|
|
${ p.show_instructions ? instructions : '' }
|
|
)
|
|
|
|
${''/* Traces */}
|
|
${ p.traces ? traces : ''}
|
|
`;
|
|
}
|
|
}
|