292 lines
12 KiB
Bash
Executable File
292 lines
12 KiB
Bash
Executable File
#!/usr/bin/env bash
|
|
cat > /etc/udev/rules.d/99-saleae-logic.rules << 'EOF'
|
|
# Rules for the Saleae Logic analyzer to allow to run the programs a normal user
|
|
# being part of the plugdev group. Simply copy the file to /etc/udev/rules.d/
|
|
# and plug the device
|
|
|
|
#BUS!="usb", ACTION!="add", SUBSYSTEM!=="usb_device", GOTO="saleae_logic_rules_end"
|
|
SUBSYSTEM!="usb", GOTO="saleae_logic_rules_end"
|
|
|
|
# Saleae Logic analyzer (USB Based)
|
|
# Bus 006 Device 006: ID 0925:3881 Lakeview Research
|
|
# Bus 001 Device 009: ID 21a9:1004 Product: Logic S/16, Manufacturer: Saleae LLC
|
|
|
|
ATTRS{idVendor}=="0925", ATTRS{idProduct}=="3881", MODE="664", GROUP="plugdev"
|
|
ATTRS{idVendor}=="21a9", ATTRS{idProduct}=="1004", MODE="664", GROUP="plugdev"
|
|
|
|
LABEL="saleae_logic_rules_end"
|
|
EOF
|
|
|
|
cat > /etc/udev/rules.d/99-pm3.rules << 'EOF'
|
|
SUBSYSTEM!="usb", GOTO="pm3_rules_end"
|
|
|
|
ATTRS{idVendor}=="17a4", ATTRS{idProduct}=="0001", MODE="0666", GROUP="plugdev"
|
|
|
|
LABEL="pm3_rules_end"
|
|
EOF
|
|
|
|
cat > /etc/udev/rules.d/99-wemos-esp32.rules << 'EOF'
|
|
SUBSYSTEM!="usb", GOTO="wemos-esp32_rules_end"
|
|
|
|
ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="ea60", MODE="0666", GROUP="plugdev"
|
|
|
|
LABEL="wemos-esp32_rules_end"
|
|
EOF
|
|
|
|
cat > /etc/udev/rules.d/99-platformio-udev.rules << 'EOF'
|
|
# Copyright (c) 2014-present PlatformIO <contact@platformio.org>
|
|
#
|
|
# Licensed under the Apache License, Version 2.0 (the "License");
|
|
# you may not use this file except in compliance with the License.
|
|
# You may obtain a copy of the License at
|
|
#
|
|
# http://www.apache.org/licenses/LICENSE-2.0
|
|
#
|
|
# Unless required by applicable law or agreed to in writing, software
|
|
# distributed under the License is distributed on an "AS IS" BASIS,
|
|
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
# See the License for the specific language governing permissions and
|
|
# limitations under the License.
|
|
|
|
#####################################################################################
|
|
#
|
|
# INSTALLATION
|
|
#
|
|
# Please visit > https://docs.platformio.org/en/latest/faq.html#platformio-udev-rules
|
|
#
|
|
#####################################################################################
|
|
|
|
#
|
|
# Boards
|
|
#
|
|
|
|
# CP210X USB UART
|
|
ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="ea60", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# FT231XS USB UART
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6015", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# Prolific Technology, Inc. PL2303 Serial Port
|
|
ATTRS{idVendor}=="067b", ATTRS{idProduct}=="2303", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# QinHeng Electronics HL-340 USB-Serial adapter
|
|
ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="7523", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# Arduino boards
|
|
ATTRS{idVendor}=="2341", ATTRS{idProduct}=="[08][02]*", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
ATTRS{idVendor}=="2a03", ATTRS{idProduct}=="[08][02]*", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# Arduino SAM-BA
|
|
ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="6124", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{MTP_NO_PROBE}="1"
|
|
|
|
# Digistump boards
|
|
ATTRS{idVendor}=="16d0", ATTRS{idProduct}=="0753", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# Maple with DFU
|
|
ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="000[34]", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# USBtiny
|
|
ATTRS{idProduct}=="0c9f", ATTRS{idVendor}=="1781", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# USBasp V2.0
|
|
ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05dc", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# Teensy boards
|
|
ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789B]?", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789A]?", ENV{MTP_NO_PROBE}="1"
|
|
SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789ABCD]?", MODE:="0666"
|
|
KERNEL=="ttyACM*", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789B]?", MODE:="0666"
|
|
|
|
#TI Stellaris Launchpad
|
|
ATTRS{idVendor}=="1cbe", ATTRS{idProduct}=="00fd", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
#TI MSP430 Launchpad
|
|
ATTRS{idVendor}=="0451", ATTRS{idProduct}=="f432", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
#GD32V DFU Bootloader
|
|
ATTRS{idVendor}=="28e9", ATTRS{idProduct}=="0189", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
#
|
|
# Debuggers
|
|
#
|
|
|
|
# Black Magic Probe
|
|
SUBSYSTEM=="tty", ATTRS{interface}=="Black Magic GDB Server", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
SUBSYSTEM=="tty", ATTRS{interface}=="Black Magic UART Port", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# opendous and estick
|
|
ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="204f", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# Original FT232/FT245 VID:PID
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6001", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# Original FT2232 VID:PID
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6010", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# Original FT4232 VID:PID
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6011", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# Original FT232H VID:PID
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6014", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# DISTORTEC JTAG-lock-pick Tiny 2
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="8220", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# TUMPA, TUMPA Lite
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="8a98", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="8a99", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# XDS100v2
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="a6d0", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# Xverve Signalyzer Tool (DT-USB-ST), Signalyzer LITE (DT-USB-SLITE)
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bca0", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bca1", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# TI/Luminary Stellaris Evaluation Board FTDI (several)
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bcd9", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# TI/Luminary Stellaris In-Circuit Debug Interface FTDI (ICDI) Board
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bcda", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# egnite Turtelizer 2
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bdc8", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# Section5 ICEbear
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="c140", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="c141", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# Amontec JTAGkey and JTAGkey-tiny
|
|
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="cff8", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# TI ICDI
|
|
ATTRS{idVendor}=="0451", ATTRS{idProduct}=="c32a", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# STLink probes
|
|
ATTRS{idVendor}=="0483", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# Hilscher NXHX Boards
|
|
ATTRS{idVendor}=="0640", ATTRS{idProduct}=="0028", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# Hitex probes
|
|
ATTRS{idVendor}=="0640", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# Altera USB Blaster
|
|
ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6001", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# Amontec JTAGkey-HiSpeed
|
|
ATTRS{idVendor}=="0fbb", ATTRS{idProduct}=="1000", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# SEGGER J-Link
|
|
ATTRS{idVendor}=="1366", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# Raisonance RLink
|
|
ATTRS{idVendor}=="138e", ATTRS{idProduct}=="9000", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# Debug Board for Neo1973
|
|
ATTRS{idVendor}=="1457", ATTRS{idProduct}=="5118", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# Olimex probes
|
|
ATTRS{idVendor}=="15ba", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# USBprog with OpenOCD firmware
|
|
ATTRS{idVendor}=="1781", ATTRS{idProduct}=="0c63", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# TI/Luminary Stellaris In-Circuit Debug Interface (ICDI) Board
|
|
ATTRS{idVendor}=="1cbe", ATTRS{idProduct}=="00fd", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# Marvell Sheevaplug
|
|
ATTRS{idVendor}=="9e88", ATTRS{idProduct}=="9e8f", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# Keil Software, Inc. ULink
|
|
ATTRS{idVendor}=="c251", ATTRS{idProduct}=="2710", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
|
|
# CMSIS-DAP compatible adapters
|
|
ATTRS{product}=="*CMSIS-DAP*", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1"
|
|
EOF
|
|
|
|
cat > /etc/udev/rules.d/99-nodemcu.rules << 'EOF'
|
|
SUBSYSTEM!="usb", GOTO="nodemcu_rules_end"
|
|
|
|
ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="7523", MODE="0666", GROUP="plugdev"
|
|
|
|
LABEL="nodemcu_rules_end"
|
|
EOF
|
|
|
|
cat > /etc/udev/rules.d/99-ch341a-prog.rules << 'EOF'
|
|
SUBSYSTEM!="usb", GOTO="ch431a-prog_rules_end"
|
|
|
|
ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="5512", MODE="0666", GROUP="plugdev"
|
|
|
|
LABEL="ch431a-prog_rules_end"
|
|
EOF
|
|
|
|
echo 'blacklist usbtest' >> /etc/modprobe.d/blacklist.conf
|
|
cat > /etc/udev/rules.d/99-xf2-logic.rules << 'EOF'
|
|
SUBSYSTEM!="usb", GOTO="fx2-probe--programming_rules_end"
|
|
|
|
ATTRS{idVendor}=="04b4", ATTRS{idProduct}=="8613", MODE="0664", GROUP="plugdev"
|
|
|
|
LABEL="fx2-probe--programming_rules_end"
|
|
EOF
|
|
|
|
echo 'blacklist usbtest' >> /etc/modprobe.d/blacklist.conf
|
|
|
|
cat > /etc/udev/rules.d/60-blackmagic-probe.rules << 'EOF'
|
|
SUBSYSTEM!="usb", GOTO="blackmagic-probe-programming_rules_end"
|
|
|
|
ATTRS{idVendor}=="1d50", ATTRS{idProduct}=="6017", MODE="0666", GROUP="plugdev"
|
|
|
|
LABEL="blackmagic-probe-programming_rules_end"
|
|
EOF
|
|
|
|
cat > /etc/udev/rules.d/60-st-linkv2.rules << 'EOF'
|
|
## Now in stlink-utils 49-stlinkv2.rules
|
|
#SUBSYSTEM!="usb", GOTO="st-link-v2-programming_rules_end"
|
|
#
|
|
#ATTRS{idVendor}=="0483", ATTRS{idProduct}=="3748", MODE="0666", GROUP="plugdev"
|
|
#
|
|
#LABEL="st-link-v2-programming_rules_end"
|
|
EOF
|
|
|
|
cat > /etc/udev/rules.d/60-cp210x.rules << 'EOF'
|
|
# udev rules file for CP210x device to be programmable py
|
|
# cp210x-program
|
|
|
|
SUBSYSTEM!="tty", GOTO="cp210x-programming_rules_end"
|
|
|
|
ATTRS{idVendor}=="10C4", ATTRS{idProduct}=="EA60", MODE="0666", GROUP="plugdev"
|
|
ATTRS{idVendor}=="10C4", ATTRS{idProduct}=="EA61", MODE="0666", GROUP="plugdev"
|
|
|
|
LABEL="cp210x-programming_rules_end"
|
|
EOF
|
|
|
|
cat > /etc/udev/rules.d/99-ftdi.rules << 'EOF'
|
|
SUBSYSTEM=="usb", GOTO="ftdi_rules_end"
|
|
|
|
ATTR{product}=="ftdi", ATTR{idProduct}=="0403", ATTRS{idVendor}=="6001", MODE="0666", GROUP="plugdev"
|
|
|
|
LABEL="ftdi_rules_end"
|
|
EOF
|
|
|
|
cat > /etc/udev/rules.d/99-USBasp.rules << 'EOF'
|
|
SUBSYSTEM=="usb", GOTO="USBasp_rules_end"
|
|
|
|
ATTR{product}=="USBasp", ATTR{idProduct}=="05dc", ATTRS{idVendor}=="16c0", MODE="0666", GROUP="plugdev"
|
|
|
|
LABEL="USBasp_rules_end"
|
|
EOF
|
|
|
|
cat > /etc/udev/rules.d/81-thinkpad-dock.rules << 'EOF'
|
|
KERNEL=="dock.0", ACTION=="change", RUN+="/usr/local/sbin/thinkpad-dock.sh"
|
|
EOF
|
|
|
|
cat > /etc/udev/rules.d/51-android.rules << 'EOF'
|
|
SUBSYSTEM!="usb", GOTO="android_rules_end"
|
|
|
|
ATTR{idVendor}=="18d1", ATTR{idProduct}=="4ee7", MODE="0666", GROUP="plugdev", SYMLINK+="android_adb", OWNER="default"
|
|
|
|
LABEL="android_rules_end"
|
|
EOF
|
|
|