* Properly handle the user enabling the
`CONFIG_BT_SMP_ALLOW_UNAUTH_OVERWRITE`
Zephyr flag and handle re-pairing to an existing taken
profile from the same address.
Adds new functionality and a behavior to disconnect an active BLE connection.
The motivation for this is that for some devices like phones, the presence of an
active BLE connection results in the onscreen keyboard being selected.
* Add HID report/descriptor for a new report with mouse buttons,
and x/y/wheel deltas.
* New mouse key press behavior for press/release of mouse keys.
* Add constants for HID main item values (e.g. data/array/absolute)
* Define and use constants for our HID report IDs.
The battery reporting has been known to cause macOS computers to wakeup repeatedly. In some cases (e.g. display or custom lighting implementation) one might want to collect battery SOC without broadcasting over BLE
* Update docs/docs/config/battery.md
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
* Previous version of multiple overrides of the default value of ZMK_USB
were problematic. Move to using board _defconfig files for the
defaults for those, along with proper `depends on` for ZMK_USB that
accounts for split and split roles.
* USB boot protocol support
* Use a single definition of a boot report, used for regular reports in
non-6KRO, and for rollover in all branches.
* Handle gaps in the zmk report when producing a boot report in HKRO mode. For
.example, if it was 8KRO, it would be possible to have the state 0 0 0 0 0 0 0
17 (by pressing 8 keys, and letting go of the first 7). Copying the first 6
bytes would not show up the single pressed key.
* Disable usb status change and callback on SOF events:
SOF events were introduced by the boot protocol changes, and required internally
by Zephyr's idle support, but are unused within ZMK itself. Ignore them in the
usb status callback.
---------
Co-authored-by: Andrew Childs <lorne@cons.org.nz>
* Initial implementation of REVIUNG34 shield.
* Add copyright information to files
* Added a README with instructions on how to enable the 1x2u layout.
* Add a default chosen matrix transform in the default keymap, alongside a commented out version for the alternate layout.
---------
Co-authored-by: Peter Johanson <peter@peterjohanson.com>
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
Fixed an error in a previous commit where a member of the selected
endpoint was used without checking if it was the correct transport type.
The nice!view status screen displays the active BLE profile regardless
of whether BLE is active, so we have to get that data directly from the
BLE code instead of from the selected endpoint.
* Refactor common parts of the Microdox sheild into a separate file. This is in preparation for adding Microdox V2 as another shield in the same directory.
* Refactor Microdox keymap into a common file in preparation for Microdox V2
* Add Microdox V2 shield definition
* Added a README to explain v1/v2 differences.
This brings the 'global-quick-tap' functionality to combos by filtering
out candidate combos that fell within their own quick tap term.
I also replaced `return 0` with `return ZMK_EV_EVENT_BUBBLE` where appropriate.
(I assume this was done in past as it is similar to errno returning, but
being that this is to signify an event type I find this more clear)
Detaching the global-quick-tap functionality from the quick-tap term.
This makes way for two improvements:
1. This functionality can be added to combos under a unified name
'global-quick-tap-ms'.
2. This allows users to set a lower term for the 'global-quick-tap'
(typically ~100ms), and a higher term for the regular
quick-tap (typically ~200ms)
This deprecates the global-quick-tap option, however if it is set, the
quick-tap-ms value will be copied to global-quick-tap-ms.
Changed the endpoints code to rename the existing endpoint types to
"transport" and add the concept of "endpoint instances". A transport is
the method by which data is sent, while instances allow describing
multiple endpoints that use the same transport (e.g. bluetooth profiles)
Also added new APIs to get the total number of possible endpoint
instances and assign each instance a unique index, which can be used
for tracking separate state for each endpoint in other code files.
* Promote previously local debounce code from kscan drivers to exposed
module lib, for use with other drivers as needed.
* Refactor existing kscan driver to new "public" API.
The GD25Q16 flash connected via QSPI seems to be causing issues
with excessive battery use and inability to sleep. Since ZMK doesn't
use it, disable it.
Resolves#1901
* Split centrals to scan with their identity so they receive direct
advertising packets.
* Split peripherals to use direct advertising if they have an existing
bond to a split central.
Bluetooth bindings are useful for handling pairings with hosts. This
change adds the header and a few default commands as template for
new users to work with.
This commit adds a new GATT characteristics on the peripheral side
and wires it up to read sensor values. The central side subscribes
to this new characteristics and replays sensor values on its side.
Co-authored-by: Peter Johanson <peter@peterjohanson.com>
With ADC pin, maximum 3.6V input needs gain 1/6 to be less than the 0.6V
reference.
With VDDHDIV5, maximum 6V input corresponds to 1.2V so gain 1/2 will be less
than the 0.6V reference and be slightly more precise.
* Add new shield for splitkb.com Aurora Sofle, supporting
keys, encoder(s), displays, and RGB.
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
* Proper usage of bt_uuid_cmp.
* Central's don't start scanning for peripherals if
`ZMK_BLE_CLEAR_BONDS_ON_START` is enabled.
* Split peripherals don't advertize if
`ZMK_BLE_CLEAR_BONDS_ON_START` is enabled.
* Add Leeloo v2
* Leeloo-Micro v1 updates to support Zephyr 3.2
* Refactored for new Encoder Configuration
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
* Add two new compatibles for macros that
take one or two parameters when bound in
a keymap.
* Use `¯o_param_1to1`, `¯o_param_1to2`, `¯o_param_2to1`,
and `¯o_param_2to2` control entries in the bindings for the macro
to have the next binding entry have it's values substituted.
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
* Add new `steps` property to the `aips,ec11` binding, to make
the driver properly report degrees in the rotation delta channel.
* Handle old sensor values in sensor rotate behavior.
* Refactor sensor events to include channel data,
necessary for prop split encoders, and avoiding duplicate calls,
to fetch channel data twice, etc.
* More consistent behavior driver API.
* Allow setting triggers per resolution at the behavior level optionally.
* Capture the last 6 entered digits, and then require pressing
Enter/Return to submit the entered digits. This matches the
messaging shown on hosts regarding how to complete pairing.
* Fix the wording on the Kconfig menu item to accurately describe
the feature.
Changed the GPIO matrix and direct GPIO key scan drivers to do a single
read per port instead of one read per pin. This is much more efficient
for some types of GPIO drivers, such as I2C GPIO expanders.
To accomplish this with minimal overhead, we now sort input pins by port
at driver init. if we iterate through the pins in the sorted order, all
pins on the same port are consecutive, so we only need to read each port
once the first time we see it.
Add CONFIG_ZMK_DISPLAY_INVERT Kconfig to invert colors
(black-on-white to white-on-black) on monochrome screens.
Currently applies only if CONFIG_LV_USE_THEME_MONO is selected,
which is the default unless user overrides it.
All displays currently used with ZMK are monochrome so it makes sense
to enable the mono theme by default, which can be disabled by the user
since we use the "imply" statement.
Without this theme setting, the small font size selection for widgets
at the bottom of the stock status screen does not work.
Adds support for the CKP family of boards
BT60V2 ANSIHotswap, ISO Hotswap, ANSI Lowpro and soldered
BT65 ANSI Hotswap, ISO Hotswap and soldered
BT75 ANSI Hotswap and soldered
The BT65 and BT75 are stylised as btXX_v1 in order to maintain compatibility with customers existing zmk-config setups in the same way the BT60 V1 was handled when merged into main.
CKP boards have identical pinmapping between hotswap and soldered so there's only one set of defconfig, dts, keymap, yaml and yml files per size
* Reports of constant/frequent disconnects, with HCI err 0x28,
"instant passed", seem linked to newer LLCP that became default
in Zephyr 3.2, so revert to the Legacy LLCP for now until a
proper fix for new LLCP can be found.
Peter Johanson
ReFil
Alessandro Bortolin
Chris Andreae
Alexander Krikun
Khalid Aj
Alex Kang
Diogo Doreto
Joel Spadin
Seth Milliken
Andrew Rae
Flo Kempenich
zhiayang
ClicketySplit
Cem Aksoylar
フィルターペーパー
Xudong Zheng
Mikhail Stralenia
Stephen Wan
Nick Winans
Kyle McCreery
digger vermont
Cem Aksoylar