Move to using proper HWMv2 board extensions
https://docs.zephyrproject.org/4.1.0/hardware/porting/board_porting.html#board-extensions
for extending upstream Zephyr boards for use with ZMK. With this change,
using upstream Zephyr board IDs directly, e.g. `seeeduino_xiao` will be
stock versions as found upstream. To use a board variant that is tuned
for ZMK use, use the `zmk` variant, e.g. `seeeduino_xiao//zmk` which is
shorthand for `seeeduino_xiao/samd21g18a/zmk`.
With the binding referenced to as uint8_t the keymap would be incorrect if more than 256 positions were in use, going to a uint16_t gives large enough headroom to not have to worry
deps: Use hal_stm32 with stm32c0 USB device fixes.
Pull in ZMK fork of hal_stm32 with USB device driver fixes for stm32c0.
feat: Add nBOOT_SEL bit setup for STM32 G0/C0 targets
Newer STM32 C0 and G0 series SoCs do not by default allow use of the
BOOT0 pin/button to enter the bootloader once something has been flash
to the device, which is a change from previous series, and usually not
what's wanted for keyboards running ZMK. To address this, add some
optional, but default initialization code to check the nBOOT_SEL bit and
override it if necessary to ensure BOOT pin/button functionality.
docs: Extract bootloader config into a dedicated page.
Pull the bootloader intergration options out of the system configuration
page into their own dedicated one.
Co-authored-by: Nicolas Munnich <98408764+nmunnich@users.noreply.github.com>
---------
Co-authored-by: Nicolas Munnich <98408764+nmunnich@users.noreply.github.com>
The static mouse_report definition did not initialize the d_scroll_x
field. The zmk_hid_mouse_report_body structure contains five fields
(buttons, d_x, d_y, d_scroll_y, d_scroll_x), but d_scroll_x was left
uninitialized.
Initialize d_scroll_x to 0 to ensure all fields in the mouse report
are properly initialized and avoid potential undefined behavior.
The RX buffer was previously defined as [RX_BUFFER_SIZE/2][2], which
created (RX_BUFFER_SIZE/2) small 2-byte buffers instead of the two
(RX_BUFFER_SIZE/2)-byte buffers required for DMA ping-pong operation.
Update the buffer definition to [2][RX_BUFFER_SIZE/2] and apply the
fix to both the central and peripheral wired split implementations.
This prevents potential DMA RX data corruption when using async UART.
Enable ZMK_BOOTMODE_MAGIC_VALUE_BOOTLOADER_TYPE_ADAFRUIT_NRF52 for
nRF52833, add nrf52833_uf2_boot_mode.dtsi as a copy of the nRF52840 file
for easy inclusion.
Enable retention for all nrfmicro subvariants (as this is the only
in-tree board that uses the nRF52833).
This fixes &bootloader for nRF52833 boards post-4.1 upgrade.
ZMK doesn't use SOF. Disable this to prevent unexpected USB
disconnection. The disconnection is observed under 3 circumstances on a
Linux host:
1. Keyboard just performed a firmware upgrade and USB is kept connected.
2. Keyboard is woken from USB power source and USB is kept connected.
3. Keyboard is connected when host is booting, and when Linux is just
initialized.
Disabling SOF processing will not affect boot protocol switching.
Tested on Makerdiary M60.
The original condition was always true, this commit fixes the condition
to correctly handle the remainder for sensor rotation behaviors by using
abs().
Co-authored-by: schuay <schuay@users.noreply.github.com>
* tempfile necessary because running build command makes directory pristine,
interfering with the build log being written.
* Should be automatically picked up by the artifacts in CI tests
refactor: Move to Zephyr v4.1.0
Move to Zephyr v4.1.0, with various build/compilation fixes needed for
basic use.
refactor(tests): Move to native_sim for tests.
feat(core): (Optionally) use Zephyr keyboard input devices
Add ability to assign a keyboard `input` device to a physical layout,
or use a chosen `zmk,matrix-input`.
fix(pointing): Refactor for changes to input API
Pass NULL user_data to input callbacks.
fix(tests): Fix BLE test to account for Zephyr changes
Handle additional read callback invocation once all matching
characteristic have been read.
fix(sensors): Initialize sensor data to 0 before fetching.
Be sure we don't get back any uninitialized data by initializing
the channel data to 0 before calling into the sensor API.
refactor(input): Adjust split input to input API changes.
Input callbacks now have a user_data parameter, adjust accordingly.
chore(bluetooth): Minor cleanup of split BT code after refactor
Small fixes and remove commented dead code left after the split
refactor.
refactor: Fix up BLE tests after Zephyr upgrade.
Minor changes to snapshots based on newer Zephyr version.
refactor(boards): Move to upstream xiao_ble board ID.
Move to official upstream board definition for the Seeed XIAO BLE.
refactor: Adjust metadata schema for HWMv2 board IDs w/ qualifiers
Adjust our ZMK metadata to allow for board IDs that include qualifiers
with slash delimeters.
refactor!(boards): Move nice!nano to HWMv2, and proper revisioning
Upgrade the nice!nano board to HWMv2, under the proper nicekeyboards
vendor directory, and with proper revisions. Includes a breaking change
to default the `2.0.0` version instead of the much older v1 (`1.0.0`).
fix: Disable Nordic dt-bindings header checks.
Disable the recently added Nordic dt-bindings header checks, which cause
issues for our HID related headers.
fix(studio): Correct `memset` usage.
Use the correct memset call to clear our RPC memory.
fix: Refactor for new Zephyr PM API
Adjustments to our PM code to match Zephyr PM APIs.
refactor(ble): Use correct BT opt for connectable.
Adjust for upstream Zephyr BT API changes for advertising options.
refactor(boards): Move MakerDiary M2 board to HWMv2.
Run the HWMv2 script to convert the MakerDiary M2 board.
fix(studio): Correct usage of thread analyzer API
Fix up the RPC code that invoke the thread analyzer API to account for
API changes.
chore: Remove nanopb module override.
Leverage nanopb version that's used by Zephyr.
feat(core): mapper for magic bootloader values.
To trigger bootloaders that use a magic value in RAM to trigger
bootloader mode, add a mapping retained memory driver that maps
write/read of boot mode values to a special magic value stored
in the actually backing RAM.
feat(behaviors): Add retention boot mode to reset.
Support new generic Zephyr retention boot mode API in the reset
behavior.
feat: Add double tap to enter bootloader functionality
Add ability to enter the bootloader if double tapping reset within the
specified window.
refactor(CI): Move to 4.1 container tags.
Move to the new 4.1 tagged container, to ensure updated SDK, Python
packages, etc.
refactor(boards): Move nRFMicro to HWMv2
Refactor nRFMicro to HWMv2, using proper SoC, revisions, and variants
(for flipped). Also move to devicetree setup of DCDC/HV DCDC.
refactor(boards): Move QMK Proton-C to HWMv2
Move Proton-C to HWMv2 for use with Zephyr 4.1.
chore(ci): Adjust core coverage for new board IDs.
Use correct board IDs, with qualifiers, for our core coverage testing.
refactor(boards): Move BDN9 to HWMv2
Move BDN9 to HWMv2, using the base `bdn9` ID, no longer including the
`_rev2` suffix in the ID.
refactor(boards): Move nice!60 to HWMv2
Migrate nice!60 to HWMv2.
refactor: Adjust how we're searching/loading keymap files
Use new post_boards_shields extension point for loading keymap files
from board/shield directories.
refactor(boards): Move planck rev6 to HWMv2.
Move Planck board definition to HWMv2, including versioning tweaks.
refactor(boards): Move OLKB Preonic to HWMv2
Move Preonic board definition to HWMv2 and remove `_rev3` variant
suffix in favor of board versioning with `3.0.0` as the default.
chore(deps): Pull in Zephyr optional group for nanopb.
Ensure we enable nanopb by adding +optional group filter.
fix(ci): Prevent slash characters in artifact names.
Move to HWMv2 means board IDs often include slashes, so replace those
with underscores when doing file uploads.
fix(usb): Adjust Kconfig settings for USB.
* Ensure USB isn't initialized automatically before we do, which can
happen if USB CDC logging is used/enabled for a given board.
* Adjust USB HID to initialize the USB class/interface before we enable
the USB device itself.
fix(display): Fix setting the small font for the mono theme.
Adjust for modified mono theme init function to pass the small font.
chore(ci): Fix changed board IDs for core coverage.
Adjust board IDs for our core coverage after move to HWMv2 and board
versioning consistently.
* planck_rev6 -> planck
* bdn9_rev2 -> bdn9
fix(underglow): Remove use of removed Kconfig WS2812 symbol
refactor(boards): Move PW CKP boards to HWMv2
Migrate the bt60, bt65, and bt75 to HWMv2.
refactor(boards): Move Puchi BLE to HWMv2
Migrate the Puchi BLE to HWMv2.
refactor(boards): Migrate Ferris rev02 to HWMv2.
Move Ferris rev02 to HMWv2, and remove the revision from the ID.
refactor(boards): Move Pillbug to HWMv2
Migrate the MechWild PillBug board to HWMv2.
refactor(boards): Migrate s40nc to HWMv2
Move the ShortyFortyNoCordy (s40nc) to HWMv2.
refactor(boards): Move bluemicro840 board to HWMv2.
Migrate bluemicro840 board to HWMv2, set up boot mode retention.
fix(boards): Retore bootloader support on XIAO BLE.
Set up necessary boot mode/retention to properly set GPREGRET to trigger
Adafruit bootloader to run on the XIAO BLE.
refactor(boards): Move Adv360 Pro to HWMv2.
Migrate Adv360 Pro left/right to HWMv2.
refactor(boards): Move Glove80 to HMWv2
Refactor the MoErgo Glove80 left/right to HWMv2.
refactor(boards): Move Mikoto to HMWv2.
Migrate Mikoto to HWMv2, with non-exact matching, tweaks to I2C
selection to imply it for the 7.2.0 revision for the fuel gauge.
refactor(boards): Move kbdfans Tofu65 2.0 to HMWv2
Move Tofu65 2.0 to HMWv2, with ID of just `tofu65`.
refactor(boards): Remove dz60rgb board
Remove dz60rgb, it's no longer readily available and we have other
current stm32 reference designs for testing.
refactor(boards): Move Corneish Zen to HMWv2
Move Corneish Zen to HMWv2, with IDs of
`corneish_zen_left`/`corneish_zen_right`.
refactor(boards): Migrate Corne-ish Zen status screen
* refactor(boards): Add boot mode to the nice!nano using common dtsi
* Add a new .dtsi for setting up nRF52 boot mode/retained memory
settings
* Adjust XIAO BLE to use the new include file
* Add boot mode to to the nice!nano
refactor(boards): Add boot mode support to nice!60 board
Enable boot mode for nice!60 board.
refactor(boards): Adjust Zephyr board metadata file locations
Move the ZMK metadata files for upstream Zephyr boards to align with the
HWMv2 directory structure that uses the vendor ID for the parent
directory for a board directory.
fix: Don't enable ZMK Display by default for a few shields
By convention, avoid enabling ZMK Display by default on shields that may
be built with under-resourced controllers (e.g. nRF52833 based ones).
fix: Remove usage of renamed Kconfig from core coverage.
Avoid using WS2812_LED_STRIP, since that Kconfig was renamed/split into
SPI/GPIO/I2S symbols.
refactor(boards): Adjust XIAO RP2040 override names, bootloader support
Adjust the .conf/.overlay files to match the proper naming for the
XIAO rp2040 board. Also add the necessary Kconfig/DTS bits for
supporting bootloader using retained memory/boot mode retention.
fix(display): Adjust stack sizes for display usage.
Updated LVGL is bumping our stack size, so adjust the system work queue
and dedicated display queue stack sizes as needed to account for this.
feat(display): Add thread name to dedicated display queue.
When thread names are enabled, pass a name to the dedicated display
queue for better tracibility when using the thread analyzer.
docs(blog): Add Zephyr upgrade post
docs: Add bootloader integration page
Add a dedicated page to outline steps to set up bootloader integration
using the boot retention mechanism in newer Zephyr versions.
fix(display): port nice!view display code
* remove `lv_` prefix from old LVGL methods
doc: Update local setup docs to use `west packages pip`
Install Zephyr deps using the newer `west packages pip --install`.
Signed-off-by: Peter Johanson <peter@peterjohanson.com>
refactor(split): Adjust BT split code for newer Zephyr APIs.
refactor(boards): Adjust upstream RP2040 boards for boot mode retention
Add necessary DTS/Kconfig settings to upstream RP2040 boards so they can
use the ZMK bootloader functionality using the boot mode retention
infrastructure.
docs: Update Zephyr docs links to 4.1.0 version.
Update all links to the Zephyr docs to the 4.1.0 versions to match our
Zephyr version in use.
docs: Add a note about using CMake v3 for maximum compatibility.
Some optional modules, like libmetal, which is used on nRF5340,
specifically require CMake v3, so add a note in the native toolchain
setup about this.
feat(pointing): Handle INPUT_BTN_TOUCH codes for mouse buttons
Translate INPUT_BTN_TOUCH input codes into button 0 press/release for
HID layer.
chore(pointing): Clean up some warning messages.
Properly check return code from queue-ing messages, and fix up some type
warnings in our logging calls.
* Fix input event codes line numbers
fix(studio): Properly serialize GATT RPC indications.
fix(core): Set a system work queue stack size of 2048 by default
We use a fair amount of stack even without BLE or RP2040, so default to
2048 by default everywhere, and constrained platforms can lowes this if
they really need.
refactor(core): Move away from deprecated DIS Kconfig symbols
Use the correct Device Information Service Kconfig symbols for our model
number and manufacturer.
refactor: Move upstream Zephyr board overrides to extensions dirs
Newer Zephyr supports "board extensions" to formally do what we've added
in ourselves via some hacks, so move all our board overlay/config file
overrides for upstream Zephyr boards into that correct structure.
fix(boards): Add xiao_ble sd_partition label for nosd snippet compat
Upstream xiao_ble uses different naming convention for the partition
labels, so add an additional label for the SD range, so the existing
nrf52840-nosd snippet will still work with the board.
fix(core): Don't force CBPRINTF_NANO, for proper formatting.
The nano CBPRINTF implementation lacks some padded formatting needed to
ensure consistent formatting of BLE addresses, which we use to store
keys as strings in a few places, so use the complete CBPRINTF by default
now.
fix(boards): Remove some references to old nice_nano_v2 board ID.
The nice!nano board definition now properly uses versioning, so avoid
referring to it with old `nice_nano_v2` board ID.
fix(boards): Remove nano overlays for old nice_nano_v2 board ID.
With board versioning in place, we can remove the unused
`nice_nano_v2.overlay` files from shields.
---------
Signed-off-by: Peter Johanson <peter@peterjohanson.com>
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
Co-authored-by: Nicolas Munnich <munnich@lipn.univ-paris13.fr>
Co-authored-by: snoyer <noyer.stephane@gmail.com>
Properly use the BT_DEVICE_APPEARANCE Zephyr symbol to advertise
the correct appearance, allowing overrides, for e.g. mice.
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
* refactor(core)!: Allow layer behaviors to "lock" layers on
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
* docs: Added documentation note on locking layers
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
---------
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
* feat(boards): Properly support settings for RPi Pico board.
* feat(shields): Add a tester_rpi_pico shield
---------
Co-authored-by: Peter Johanson <peter@peterjohanson.com>
This adds additional required configs for the Nordic NRF52840 Dongle (PCA10059),
which was already supported by Zephyr, but didn't have flash settings
and Bluetooth enabled.
Adds some encoder tests for rotating, and basic layers.
Mock Kscans don't seem to interact nicely, slightly on the hacky side.
However, better to have hacky tests than no tests.
Fixes for regressions from split refactors that broke polling mode
specifically.
Co-authored-by: honorless <86894501+lesshonor@users.noreply.github.com>
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
Remove the previous condition on ZMK_SPLIT_WIRED that only enabled it if
!ZMK_BLE. We'll defer to the `depends on` to ensure the DTS exists to
use wired split to make that decision on enabling the feature.
Allow the nice!view widget to display the status of each profile by:
- not adding a circle around the number if the profile is not bound
- drawing a dashed circle around the number if a profile is bound but not connected
Peter Johanson
Willow Herring
Xudong Zheng
Nicolas Munnich
cormoran
Solodros
snoyer
Alexander Krikun
hyx0329
Joel Spadin
Jakob Linke
Genteure
Cem Aksoylar
Artem
Andrés Mejía
Aurélien Vallée
Marius Petcu