Given a typical setup of a battery at ~4 V and a nice!nano v2 running at
3.3 V, I measured a small increase in power usage (using a Nordic PPK2)
when SOC_DCDC_NRF52X_HV was enabled. This changes the nice_nano_v2 and
mikoto boards so this option is disabled by default.
Fixes#2990
refactor(split): Refactor split code for extension
Extract central/peripheral code to allow for plugging in alternate
transports, instead of tying all split logic to BT.
feat(split): Add full-duplex wired split support
* Depends on full-duplex hardware UART for communication.
* Supports all existing central commands/peripheral events, including
sensors/inputs from peripherals.
* Only one wired split peripheral supported (for now)
* Relies on chosen `zmk,split-uart` referencing the UART device.
docs: Add wired split config docs.
Migrate split to its own dedicated config file, and add details
on wired split config.
Co-authored-by: Nicolas Munnich <98408764+Nick-Munnich@users.noreply.github.com>
fix: Properly override stack size on RP2040
Move the system work queue stack size override on RP2040 ouf of
a `ZMK_BLE` conditional so it is properly applied generally for that
SoC.
---------
Co-authored-by: Nicolas Munnich <98408764+Nick-Munnich@users.noreply.github.com>
* Set default revision to 5.20
* update mikoto board defs
* add revision info to mikoto.zmk.yml
* use zephyr aliases to handle mikoto_520
* enable pull-ups for on-board i2c
Renamed the composite kscan's column-offset property to col-offset for
consistency with other properties such as matrix transform's col-offset
and matrix kscan's col-gpios.
Removed the combined .dtsi file for each group of common layouts, and
split the position map across the files in each group. This makes
reading the position maps slightly more difficult, but it aligns the
common layouts with the keyboard-specific ones such as
foostan/corne.dtsi in that simply including each header adds the
layout, with no need to set status = "okay".
* Add Corne and Ferris shared layouts, and update the respective
shields to use them.
* Add a sample Hummingbird physical layout for testing posix xiao.
* Add Sofle physical layout as an additional reference.
* To avoid spurious CDC ACM instances when usint CDC ACM for something
other than logging, move to the approach used by Zephyr of using a
snippet to redirect console output to a CDC ACM node added by the
snippet. Remove all the existing static CDC ACM nodes.
* Add new `zmk-usb-logging` snippet that mirrors the upstream
`cdc-acm-logging` snippet, but still does our extra USB logging
configuration.
* Updated logging docs accordingly.
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
Added a Kconfig option to enable SOC_DCDC_NRF52X_HV for nice_nano_v2
and mikoto. According to Nordic's documentation, the DC/DC regulator is
more efficient than the LDO regulator, so this is enabled by default.
The following boards do not support this mode and were not changed:
- nice_nano
- nice60
- nrfmicro_11, nrfmicro_13
- nrf52840_m2
- bluemicro840
I could not find schematics to confirm whether the following boards
support this mode:
- bt60_v1, bt60_v2
- bt65_v1
- bt75_v1
- corneish_zen_v1, corneish_zen_v2
- pillbug
- puchi_ble_v1
- s40nc
* Don't default heap mempool by default now that there's a dedicated
LVGL mempool
* Set proper defaults for CiZ display hardware/custom screen.
* Double the dedicated display thread stack size for CiZ.
Nicolas Munnich
Joel Spadin
Pete Johanson
Genteure
yuki
ReFil
Nicolas Munnich
Cem Aksoylar
Maxime Vincent
Alexander Krikun
honorless
Horu
Sadek Baroudi
Pablo
Seth Milliken
ton-im