test(sensors): Add mock encoder sensor
Add a new mock sensor driver for generating mock encoder sensor channel
data.
test(split): Add a peripheral sensor split test
Test BLE split logic for peripheral sensors (encoders).
When building a unibody or central warnings get thrown for the backslash newlines at EOF in combos.h and input_listeners.h. Adding a trailing newline to the affected files rectifies this
* Enhance the BLE test runner to build additional peripheral builds
when detecting peripheral*.overlay files in the test.
* Add basic and multiple-peripheral tests to exercise the testing
support
* Add test for triggering local behaviors on split peripherals.
fix(ble): Fix building split code w/o settings
* Properly exclude storing peripheral addresses to settings when
settings support isn't turned on.
refactor(pointing): Allow stopping event propagation
Allow input processors to return a special value if a given input event
should not be further processed/propagated.
feat(pointing): Add behavior input processor
Add the ability to intercept certain input events and trigger behaviors
when they occur.
Co-authored-by: Jorge Villalobos <minusfive@users.noreply.github.com>
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
The "arg" field on nanopb structs is a void* because it is shared
between the encode and decode callbacks, even though the encode
callback probably should not modify the data. We are passing const data
using this non-const pointer, which causes warnings about discarding
const. This commit explicitly casts to void* to suppress these warnings.
* include kscan.yaml so we can set kscan-composite as a wakeup source
* modify enable and disable callback to check for wakeup capabilities of
composite and children
* disable children wakeup source
The disable function is only called
when the composite is not an enabled wakeup source.
In that case the children should also not be an enabled
wakeup source, so they can get suspended
* feat(mouse): Add mouse move and scroll support
* Use Zephyr input subsystem for all pointers.
* Input processors for modifying events, e.g. scaling, swapping
codes, temporary (mouse) layers, etc.
* Mouse move/scroll behaviors.
* Infrastructure in place for physical pointer input devices.
* feat: Add input split support.
* docs: Add initial pointer docs.
---------
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
Co-authored-by: Alexander Krikun <krikun98@gmail.com>
Co-authored-by: Robert U <urob@users.noreply.github.com>
Co-authored-by: Shawn Meier <ftc@users.noreply.github.com>
Co-authored-by: Chris Andreae <chris@andreae.gen.nz>
Co-authored-by: Anant Thazhemadam <47104651+thazhemadam@users.noreply.github.com>
Co-authored-by: Erik Tollerud <erik.tollerud@gmail.com>
Co-authored-by: Nicolas Munnich <98408764+Nick-Munnich@users.noreply.github.com>
* Set default revision to 5.20
* update mikoto board defs
* add revision info to mikoto.zmk.yml
* use zephyr aliases to handle mikoto_520
* enable pull-ups for on-board i2c
docs: Fix incorrect kconfig default values
fix(Kconfig): Added a name to EC11's trigger mode choice, allowing it to be set in device Kconfig.defconfig
refactor(Kconfig): Moved designer defaults out into new files
* Add VERSION file that Zephyr will pick up
* Add release-please automation
* Updated docs on commits messages, and PR process
* Updated PR template to match.
---
Release-As: 0.1.0
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
Add support for initializing a pin to a given high/low value during
configuration. Needed for proper initialization by systems like
GPIO hogs or gpio-leds Zephyr drivers.
Renamed the composite kscan's column-offset property to col-offset for
consistency with other properties such as matrix transform's col-offset
and matrix kscan's col-gpios.
Added physical layouts for the following variants of numpads:
- With and without extra top row
- 2U plus key or 1U plus and backspace keys
- 2U 0 key or 1U 0 and 00 keys
- Full 1U grid/macropad layout
Other layouts exist, such as "southpaw" horizontally mirrored layouts,
and layouts with a fifth column, but those seem to be much less common.
* To avoid tons of migration, extra flash writes, etc, we keep
the keymaps and settings using a key position index that's tied
to the stock layout, and at runtime mapping key positions as
needed.
* Added matrix transforms and physical layouts for three typical
configurations.
* Tweaked default keymap to be more immediately useful for ZMK and more
closely resemble the default keymaps of non-ZMK firmware.
* Board-specific Kconfig settings migrated to main shield file, so they
will be exposed to end-users through the setup script.
* Tidied formatting and shortened overlong layer labels.
* Aligned encoder configuration with current standards.
* Corrected default number of RGB LEDs.
* Enabled OLED by default in a less authoritarian way.
Add physical layouts and update the keymap for Ladniy's Jiran.
Layouts are added for all three possible transforms:
- Full (with additional pinky key and number row)
- Jian (with additional pinky key), re-uses Jian layout
- 6 column (Corne), re-uses Jian layout
Keymap update includes &studio_unlock.
Add physical layouts and update the keymap for King of Hedgehogs' Jian.
Layouts are added for all three possible transforms:
- Full (with additional pinky key)
- 6 column (Corne)
- 5 column (Minidox)
The layouts are added to be re-usable for the Jiran and other custom boards/shields.
Keymap update includes, small guide clarifications, output selection,
tri-layer and &studio_unlock.
Add physical layouts and update the keymap for Joric's Jorne.
Layouts are added for all three possible transforms:
- Full (with additional pinky key)
- 6 column (Corne), re-uses Corne layout
- 5 column (Minidox), re-uses Corne layout
Keymap update includes quick-tap-ms (essential for this keymap), small
guide clarifications, output selection, tri-layer and &studio_unlock.
* Add tracking to see if we ever hit a configured status before
suspend, so we can properly track "is connected" even when
connected to a suspended/asleep host.
* Now that device init of kscan sideband is in POST_KERNEL stage,
use a separate SYS_INIT for auto enabling the device so processing
of early/initial presses from referenced toggle mode kscan devices
occurs at the proper time during init.
Pete Johanson
Willow Herring
Robert U
Nicolas Munnich
Joel Spadin
svek1
pabile
yuki
Cem Aksoylar
esplo
Nicolas Munnich
Alexander Krikun
Zack Forbing
honorless
angweekiat
Allister MacLeod