Solves issue #3019 (incorrect putty link)
- putty.org is not affiliated with the putty software
- the site now hosts links to interviews about a recent pandemic
- this pull request updates the link to the actual project page
Co-authored-by: Léon Hagenaars-Keus <lhagenaars@sogyo.nl>
Remove the previous condition on ZMK_SPLIT_WIRED that only enabled it if
!ZMK_BLE. We'll defer to the `depends on` to ensure the DTS exists to
use wired split to make that decision on enabling the feature.
* docs: Document requirements-extra.txt for Studio builds
* docs: Note endpoint selection requirement for Studio
* docs: Fix indents in list items in native setup page
Add this file to .prettierignore because it messes all the additional indents.
There is also no way to make prettier ignore a range of lines in MDX files AFAICT.
* Revert "docs: Fix indents in list items in native setup page"
This reverts commit 6d8aeba801.
* blog: Add blog post on pinning ZMK version
* docs: apply suggestions from code review
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
* docs: bump date for correctly pinned template
---------
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
feat(split): Runtime selection of split transport
Allow building multiple split transports, and select an active
one based on the transport availability. Wired split availability
depends on additional `detect-gpios` which must be a GPIO pin
that goes active when a wired connection is present.
feat(split): Suspend/resume wired UART devices.
To better support runtime split support, suspend/resume the UART
as necessary to save power when not using the UART.
docs(split): Document adjusting nRF52 UART interrupt priorities
For wired split on nRF52, you may need to adjust the priority for UART
interrupts lower, to ensure the interrupts used for timing sensitive
BT operations can run when needed, so document this in our pinctrl docs.
refactor(split): Restore use of aync UART on nRF52.
With fixes for Zephyr UART driver, re-enable using async API on nRF52.
fix(split): Minor wired split fixes.
Various minor fixes for wired split to avoid spurious TX in half duplex,
etc.
fix: Unconditionally define HID payloads to avoid error.
Don't conditionally define HID indicator payload, to avoid compilation
errors.
docs(split): Expand on details of split transports.
Expand the split keyboard documentation with a more fleshed out section
on the available split trasnports, and what is and isn't supported by
each, including the runtime selection functionality.
---------
Co-authored-by: Nicolas Munnich <98408764+nmunnich@users.noreply.github.com>
* docs: Add secondary functions for the keypad number keys
* docs: Change descriptions of secondary functions for the keypad number keys
The descriptions were updated to match those of the USB HID usage tables.
* Reference combos by index, not 32-bit pointers, and store bitfields
instead of arrays in several places, to bring down our flash/RAM usage.
* Use bit field to track candidate combos, to avoid needing an explicit
`ZMK_COMBO_MAX_COMBOS_PER_KEY` setting.
* Determine the max keys per combo automatically from the devicetree,
so we remove the ZMK_COMBO_MAX_KEYS_PER_COMBO Kconfig symbol.
refactor(split): Refactor split code for extension
Extract central/peripheral code to allow for plugging in alternate
transports, instead of tying all split logic to BT.
feat(split): Add full-duplex wired split support
* Depends on full-duplex hardware UART for communication.
* Supports all existing central commands/peripheral events, including
sensors/inputs from peripherals.
* Only one wired split peripheral supported (for now)
* Relies on chosen `zmk,split-uart` referencing the UART device.
docs: Add wired split config docs.
Migrate split to its own dedicated config file, and add details
on wired split config.
Co-authored-by: Nicolas Munnich <98408764+Nick-Munnich@users.noreply.github.com>
fix: Properly override stack size on RP2040
Move the system work queue stack size override on RP2040 ouf of
a `ZMK_BLE` conditional so it is properly applied generally for that
SoC.
---------
Co-authored-by: Nicolas Munnich <98408764+Nick-Munnich@users.noreply.github.com>
refactor(behaviors): Add max-held tap-dance config
Add new `CONFIG_ZMK_BEHAVIOR_TAP_DANCE_MAX_HELD` config for reducing RAM
usage on more constrained devices.
refactor(behaviors): Move defaults to Kconfig.defaults
docs: Inline simple physical layouts in new shield guide
docs: Fix broken anchor in module creation
docs: Make physical layout transform label consistent and comment
Zephyr is still working on the plan upstream for generically controlling
display "backlight" pins with GPIO/PWM, so in the meantime, add our
own chosen property `zmk,display-led` that is set to an LED device child
to allow blanking/unblanking of devices that use a dedicated backlight
control pin.
To be able to save on flash space, for layouts on space constrained
devices that don't require rotation, make key rotation props
optional behind a new Kconfig flag.
docs: Move battery sensing hardware integration to new page
docs: Refactor lighting hardware integrations to new category
docs: Link to pin control page from lighting pages
docs: Consolidate lighting feature pages
docs: Remove incorrect redirect
docs: Consolidate lighting config pages
docs: Add missing code fence languages in pointing
docs: Fix default msc exponent in example
docs: Make pointing hardware integration follow semantic structure
refactor(pointing): Allow stopping event propagation
Allow input processors to return a special value if a given input event
should not be further processed/propagated.
feat(pointing): Add behavior input processor
Add the ability to intercept certain input events and trigger behaviors
when they occur.
Co-authored-by: Jorge Villalobos <minusfive@users.noreply.github.com>
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
* include kscan.yaml so we can set kscan-composite as a wakeup source
* modify enable and disable callback to check for wakeup capabilities of
composite and children
* disable children wakeup source
The disable function is only called
when the composite is not an enabled wakeup source.
In that case the children should also not be an enabled
wakeup source, so they can get suspended
* feat(mouse): Add mouse move and scroll support
* Use Zephyr input subsystem for all pointers.
* Input processors for modifying events, e.g. scaling, swapping
codes, temporary (mouse) layers, etc.
* Mouse move/scroll behaviors.
* Infrastructure in place for physical pointer input devices.
* feat: Add input split support.
* docs: Add initial pointer docs.
---------
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
Co-authored-by: Alexander Krikun <krikun98@gmail.com>
Co-authored-by: Robert U <urob@users.noreply.github.com>
Co-authored-by: Shawn Meier <ftc@users.noreply.github.com>
Co-authored-by: Chris Andreae <chris@andreae.gen.nz>
Co-authored-by: Anant Thazhemadam <47104651+thazhemadam@users.noreply.github.com>
Co-authored-by: Erik Tollerud <erik.tollerud@gmail.com>
Co-authored-by: Nicolas Munnich <98408764+Nick-Munnich@users.noreply.github.com>
docs: Fix incorrect kconfig default values
fix(Kconfig): Added a name to EC11's trigger mode choice, allowing it to be set in device Kconfig.defconfig
refactor(Kconfig): Moved designer defaults out into new files
Add a separate ignore script that checks git changes but also
only deploys main and version branches to allow us to deploy
versioned docs.
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
* Add VERSION file that Zephyr will pick up
* Add release-please automation
* Updated docs on commits messages, and PR process
* Updated PR template to match.
---
Release-As: 0.1.0
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
Renamed the composite kscan's column-offset property to col-offset for
consistency with other properties such as matrix transform's col-offset
and matrix kscan's col-gpios.
* docs(feat): Provide example of PIO SPI for RGB underglow
* docs(feat): further generalize RGB information
* docs: use nice_nano_v2 for board-specific shield config example
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
---------
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
* docs(feat): Adding some additional clarity around low power states, with guide portion moved to hardware integration
---------
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
* docs: Split local toolchain setup for Docker in two separated approaches.
This includes adding a new dropdown for Docker which lists overall steps
that have to be done when setting up the environment. Furthermore, the
previous documentation is no listed under VSCode and new documentation
for the Devcontainer CLI has been added.
Since the described approaches for VS Code and Dev Container CLI varied
quiet a bit a more unified way of setting them up was added. Due to
that, the documentation for building and flashing could be simplified as
well.
* docs: Update documentation for building and flashing for devcontainers.
Moved information about creating volumes for Docker containers into the
overall Docker setup documentation. Add warning for changing build
directory or adding options for building at the top of the page.
* feat(devcontainers): Add new volume for mounting modules.
---------
Co-authored-by: Nicolas Munnich <98408764+Nick-Munnich@users.noreply.github.com>
* docs(feat): Added a page on pin control for ZMK
* Added note on HAL modules
* docs: Added images of boards
---------
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
* fix(docs): Fix TypeScript import diagnostics
Set the TypeScript module resolution mode to "bundler" so it correctly
resolves imports in .ts files instead of showing errors in IDEs.
* chore(docs): Update web-tree-sitter
Updated web-tree-sitter, and switched from having a copy of
tree-sitter-devicetree.wasm in the repo to using the latest version of
the tree-sitter-devicetree module, which now contains the .wasm file.
* fix(docs): Make keymap upgrader resize vertically only
Changed the textarea in the keymap ugprader to allow only vertical
resizing. This better fits the layout of the page, and it prevents you
from shrinking the box horizontally to the point where it doesn't fit
anything.
Nicolas Munnich
dependabot[bot]
Léon Hagenaars-Keus
Pete Johanson
Cem Aksoylar
ouj4k2q5
Steven Sheldon
Omar L.
Aasim-A
romil-soni
Tygo van den Hurk
Genteure
Will Hack
idesignstuff
Nicolas Munnich
Nick Winans
Nicolas Munnich
svek1
Danil Romanov
Azalea Colburn
Alexander Krikun
Joel Spadin
Alex Olshansky
Allister MacLeod
Brian Tannous
Less/Rikki
Pauiii