History

Peter Johanson 5d5900fa5c refactor(boards): Move nice!nano to ZMK variant by default Make the standard nice!nano board ID be `nice_nano/nrf52840/zmk` or `nice_nano//zmk` by shorthand.		2026-01-31 19:55:05 -07:00
..
boards	refactor(boards): Move nice!nano to ZMK variant by default	2026-01-31 19:55:05 -07:00
Kconfig.defconfig	…
Kconfig.shield	refactor: Replace tabs with spaces	2023-04-24 16:07:04 -07:00
README.md	feat!: Move to zephyr v4.1 (#3060 )	2025-12-09 19:43:22 -05:00
nice_view_adapter.conf	…
nice_view_adapter.overlay	…
nice_view_adapter.zmk.yml	…

README.md

nice!view Adapter

This shield is used as an adapter between the nice!view and existing shields/boards that expose an I2C OLED header.

To use this shield, you should add this shield to your list of shields before nice_view.

The nice!view will use the SDA/SCL pins of the OLED, and then the adapter expects a final pin to be "bodged" from your microcontroller to the nice!view CS pin. This adapter assumes that the CS pin bodged is the &pro_micro 1 pin or "D1", which is the top left pin when looking at the front of the board. If you can't use this pin, you'll need to override the cs-gpios for the &nice_view_spi bus (in your zmk-config keymap for example) or you will want to define your own &nice_view_spi bus without using this adapter.

west build -b nice_nano -- -DSHIELD="lily58_left nice_view_adapter nice_view"