Joel Spadin 8059e671b2 fix(boards): Disable high voltage DC-DC by default (#2995) ... Given a typical setup of a battery at ~4 V and a nice!nano v2 running at 3.3 V, I measured a small increase in power usage (using a Nordic PPK2) when SOC_DCDC_NRF52X_HV was enabled. This changes the nice_nano_v2 and mikoto boards so this option is disabled by default. Fixes #2990		2025-07-21 17:14:29 +02:00
..
Kconfig	fix(boards): Disable high voltage DC-DC by default (#2995)	2025-07-21 17:14:29 +02:00
Kconfig.board	…
Kconfig.defconfig	…
arduino_pro_micro_pins.dtsi	fix(boards): nrf boards missing SPI in pinctrl and dtsi, requiring users to manually define in their shield definitions if they wanted to use SPI	2024-04-25 00:54:44 -07:00
board.cmake	feat(boards): Make `west flash` work with new UF2 runner.	2024-02-09 14:32:46 -08:00
nice_nano-pinctrl.dtsi	fix(boards): nrf boards missing SPI in pinctrl and dtsi, requiring users to manually define in their shield definitions if they wanted to use SPI	2024-04-25 00:54:44 -07:00
nice_nano.dts	refactor: Remove unimportant labels	2023-12-04 20:06:54 -06:00
nice_nano.dtsi	refactor: Remove static CDC ACM logging nodes.	2024-06-20 12:06:13 -06:00
nice_nano.yaml	…
nice_nano.zmk.yml	…
nice_nano_defconfig	…
nice_nano_v2.dts	refactor: Remove unimportant labels	2023-12-04 20:06:54 -06:00
nice_nano_v2.yaml	…
nice_nano_v2.zmk.yml	…
nice_nano_v2_defconfig	…
pre_dt_board.cmake	fix(boards): Suppress devicetree warning	2024-06-30 12:59:46 -04:00