[Gerber][Fixed] Extension used for JLCPCB inner layers.

- The .gpN stands for "Gerber Plane N", which are plotted negative.
- Normal (positive) inner layers should be named.gN
- We are plotting them in positive.

Fixes #329

CHANGELOG.md

@@ -54,6 +54,7 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
   real drill tools. It generated bogus reports about wrong OARs. (#326)
 - BoM: Digi-key link in the HTML output.
 - Problems when using more than one dielectric in the stack-up. (#328)
+- Gerber: Extension used for JLCPCB inner layers. (#329)
 
 ## [1.4.0] - 2022-10-12
 ### Added

docs/samples/JLCPCB.kibot.yaml

@@ -40,7 +40,7 @@ outputs:
       use_gerber_net_attributes: false
       line_width: 0.1
       subtract_mask_from_silk: true
-      inner_extension_pattern: '.gp%n'
+      inner_extension_pattern: '.g%n'
     layers:
       # Note: a more generic approach is to use 'copper' but then the filenames
       # are slightly different.

docs/samples/JLCPCB_stencil.kibot.yaml

@@ -40,7 +40,7 @@ outputs:
       use_gerber_net_attributes: false
       line_width: 0.1
       subtract_mask_from_silk: true
-      inner_extension_pattern: '.gp%n'
+      inner_extension_pattern: '.g%n'
     layers:
       - copper
       - F.SilkS

docs/samples/P-Ban.kibot.yaml

@@ -24,7 +24,7 @@ outputs:
       use_gerber_net_attributes: false
       line_width: 0.15
       subtract_mask_from_silk: false
-      inner_extension_pattern: '.gp%n'
+      inner_extension_pattern: '.g%n'
       custom_reports:
         - output: '製造基準書.txt'
           content: '部品面パターン : ${filename(F.Cu)}\r\n半田面パターン : ${filename(B.Cu)}\r\n内層パターン1 : ${filename(In1.Cu)}\r\n内層パターン2 : ${filename(In2.Cu)}\r\n内層パターン3 : ${filename(In3.Cu)}\r\n内層パターン4 : ${filename(In4.Cu)}\r\n内層パターン5 : ${filename(In5.Cu)}\r\n内層パターン6 : ${filename(In6.Cu)}\r\n部品面レジスト : ${filename(F.Mask)}\r\n半田面レジスト : ${filename(B.Mask)}\r\n部品面シルク : ${filename(F.SilkS)}\r\n半田面シルク : ${filename(B.SilkS)}\r\n基板外形 : ${filename(Edge.Cuts)}\r\n\nドリルデータ : ${basename}.drl\r\nドリルマップ : ${basename}-drl_map.gbr\r\nドリルリスト : ${basename}-drl.rpt\r\n'

kibot/resources/config_templates/gerber/JLCPCB.kibot.yaml

@@ -40,7 +40,7 @@ outputs:
       use_gerber_net_attributes: false
       line_width: 0.1
       subtract_mask_from_silk: true
-      inner_extension_pattern: '.gp%n'
+      inner_extension_pattern: '.g%n'
     layers:
       # Note: a more generic approach is to use 'copper' but then the filenames
       # are slightly different.