test(behaviors): Add same position sticky key tests
fix(behaviors): Make multiple sticky keys work on same key position
refactor(behaviors): Remove unused param2 in sticky keys
test(pointing): Add mock input device.
New mock input device to generate input events for tests.
test(split): Add peripheral input test.
Test event propagation from peripheral input devices.
fix(split): Proper scoping for local within switch.
Minor compile fix.
chore: Fix up test snapshots after logging changes.
Adjust the test snapshots after logging changes to the central.
fix(kscan): Don't fire last mock event twice.
Fix a bug where the kscan mock would raise the last mock event
twice before halting processing.
test(sensors): Add mock encoder sensor
Add a new mock sensor driver for generating mock encoder sensor channel
data.
test(split): Add a peripheral sensor split test
Test BLE split logic for peripheral sensors (encoders).
* Enhance the BLE test runner to build additional peripheral builds
when detecting peripheral*.overlay files in the test.
* Add basic and multiple-peripheral tests to exercise the testing
support
* Add test for triggering local behaviors on split peripherals.
fix(ble): Fix building split code w/o settings
* Properly exclude storing peripheral addresses to settings when
settings support isn't turned on.
refactor(pointing): Allow stopping event propagation
Allow input processors to return a special value if a given input event
should not be further processed/propagated.
feat(pointing): Add behavior input processor
Add the ability to intercept certain input events and trigger behaviors
when they occur.
Co-authored-by: Jorge Villalobos <minusfive@users.noreply.github.com>
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
* feat(mouse): Add mouse move and scroll support
* Use Zephyr input subsystem for all pointers.
* Input processors for modifying events, e.g. scaling, swapping
codes, temporary (mouse) layers, etc.
* Mouse move/scroll behaviors.
* Infrastructure in place for physical pointer input devices.
* feat: Add input split support.
* docs: Add initial pointer docs.
---------
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
Co-authored-by: Alexander Krikun <krikun98@gmail.com>
Co-authored-by: Robert U <urob@users.noreply.github.com>
Co-authored-by: Shawn Meier <ftc@users.noreply.github.com>
Co-authored-by: Chris Andreae <chris@andreae.gen.nz>
Co-authored-by: Anant Thazhemadam <47104651+thazhemadam@users.noreply.github.com>
Co-authored-by: Erik Tollerud <erik.tollerud@gmail.com>
Co-authored-by: Nicolas Munnich <98408764+Nick-Munnich@users.noreply.github.com>
This allows for the device name to be set at runtime, possible uses for this include a custom display screen that lets you type it in using the keycode state event, future configuration in zmk studio, or altering it per profile as per #1169
* Add keymap API for getting/setting a bindings
in keymap layers.
* Add layer move support via intemediary ordering array.
* Add settings storage for keymap changes.
* Add security related tests to verify behavior when trying to read
a GATT characteristic from our peripheral with and without client
auto security request/retry.
Removed the label property from built-in behaviors, custom behaviors
defined in a few keymaps, and macros generated with ZMK_MACRO().
Now that node names are used to identify behaviors, and names only need
to be unique within the set of behaviors, the names of all behaviors
have been shortened to be similar to their original labels.
This means that any keymaps which reference behavior nodes by name
instead of by label will need to be updated. Keymaps typically use the
labels though, so most keymaps should be unaffected by this change.
Removed "label" properties which no longer have any function.
Labels are still used as layer names and as identifiers for sending
behaviors between sides of a split keyboard, so those have been left
alone for now.
* Add HID report/descriptor for a new report with mouse buttons,
and x/y/wheel deltas.
* New mouse key press behavior for press/release of mouse keys.
* Add constants for HID main item values (e.g. data/array/absolute)
* Define and use constants for our HID report IDs.
This brings the 'global-quick-tap' functionality to combos by filtering
out candidate combos that fell within their own quick tap term.
I also replaced `return 0` with `return ZMK_EV_EVENT_BUBBLE` where appropriate.
(I assume this was done in past as it is similar to errno returning, but
being that this is to signify an event type I find this more clear)
Detaching the global-quick-tap functionality from the quick-tap term.
This makes way for two improvements:
1. This functionality can be added to combos under a unified name
'global-quick-tap-ms'.
2. This allows users to set a lower term for the 'global-quick-tap'
(typically ~100ms), and a higher term for the regular
quick-tap (typically ~200ms)
This deprecates the global-quick-tap option, however if it is set, the
quick-tap-ms value will be copied to global-quick-tap-ms.
* Add two new compatibles for macros that
take one or two parameters when bound in
a keymap.
* Use `¯o_param_1to1`, `¯o_param_1to2`, `¯o_param_2to1`,
and `¯o_param_2to2` control entries in the bindings for the macro
to have the next binding entry have it's values substituted.
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
Updated existing pre-commit hooks and added some new hooks:
- Remove trailing whitespace
- Ensure every non-empty file ends with a new line
- Check YAML file validity
- Prevent adding large files
- Ensure any scripts with shebangs are executable
Added a GitHub action to run pre-commit on every commit. Removed any
existing actions which duplicate pre-commit.
Ran pre-commit on the codebase.
Added ZMK_MACRO_DEFAULT_WAIT_MS and ZMK_MACRO_DEFAULT_TAP_MS to set
global defaults for the wait-ms and tap-ms properties of macros.
Also reduced the default timings for macros, since it's been reported
many times that 100 ms is too slow.
* Update docs for mod-morph
* Add unit tests for mod-morph
* Add keep-mods to DT binding
Co-authored-by: Martin Aumüller <aumuell@reserv.at>
Co-authored-by: Cem Aksoylar <caksoylar@users.noreply.github.com>
* This is a very simple fix to a rather complicated issue. Essentially,
hold-taps will "release" (raise) their captured keys before actually
telling the event manager they have captured a key. This means the event
manager ends up assigning the `last_listener_index` to the hold-tap
subscription rather than the combo. So when the combo calls
`ZMK_EVENT_RELEASE` it raises after the hold-tap instead of after the
combo as the combo code expects.
* The corresponding test (which fails without this change) has also been added.
* An event can be captured and released in the same event handler, before
the last_listener_index would have been updated. This causes some handlers
to be triggered multiple times.
* The solution is to update the last_listener_index before calling the next
event handler, so capturing and releasing within an event handler is harmless.
* Also see discussion at https://github.com/zmkfirmware/zmk/pull/1401
* If our handler dedides our undedided hold-tap,
return early before continuing.
* Fix incorrect pointer logic, resulting in combo
candidate filtering leaving incorrect timeout details.
Co-authored-by: Andrew Rae <ajrae.nv@gmail.com>
Co-authored-by: okke <okke@formsma.nl>
* Proporly handle multiple conditonal layers w/ the same target
`then-layer` values.
* Move handling to work callback, to avoid re-entrance for cascading
layers enabling other layers.
Cem Aksoylar
Xudong Zheng
Pete Johanson
Nicolas Munnich
ReFil
Horu
Theo Lemay
Theo Lemay
honorless
Joel Spadin
Alexander Krikun
Andrew Rae
Flo Kempenich
nguyendown
Robert U
Okke Formsma