Upgrade the nice!nano board to HWMv2, under the proper nicekeyboards
vendor directory, and with proper revisions. Includes a breaking change
to default the `2.0.0` version instead of the much older v1 (`1.0.0`).
* feat(boards): Properly support settings for RPi Pico board.
* feat(shields): Add a tester_rpi_pico shield
---------
Co-authored-by: Peter Johanson <peter@peterjohanson.com>
This adds additional required configs for the Nordic NRF52840 Dongle (PCA10059),
which was already supported by Zephyr, but didn't have flash settings
and Bluetooth enabled.
Allow the nice!view widget to display the status of each profile by:
- not adding a circle around the number if the profile is not bound
- drawing a dashed circle around the number if a profile is bound but not connected
Given a typical setup of a battery at ~4 V and a nice!nano v2 running at
3.3 V, I measured a small increase in power usage (using a Nordic PPK2)
when SOC_DCDC_NRF52X_HV was enabled. This changes the nice_nano_v2 and
mikoto boards so this option is disabled by default.
Fixes#2990
refactor(split): Refactor split code for extension
Extract central/peripheral code to allow for plugging in alternate
transports, instead of tying all split logic to BT.
feat(split): Add full-duplex wired split support
* Depends on full-duplex hardware UART for communication.
* Supports all existing central commands/peripheral events, including
sensors/inputs from peripherals.
* Only one wired split peripheral supported (for now)
* Relies on chosen `zmk,split-uart` referencing the UART device.
docs: Add wired split config docs.
Migrate split to its own dedicated config file, and add details
on wired split config.
Co-authored-by: Nicolas Munnich <98408764+Nick-Munnich@users.noreply.github.com>
fix: Properly override stack size on RP2040
Move the system work queue stack size override on RP2040 ouf of
a `ZMK_BLE` conditional so it is properly applied generally for that
SoC.
---------
Co-authored-by: Nicolas Munnich <98408764+Nick-Munnich@users.noreply.github.com>
feat(shields): Add tester_xiao layouts
Added two layouts for the XIAO tester shield:
- Keys arranged to match the XIAO pinout, viewed from the front
- Single row of eleven keys
These layouts are abstractions since the tester_xiao shield may be
used in a situation where the "keys" are actually jumper wires on a
breadboard or the like.
feat(shields): Add tester_pro_micro layouts
Added two layouts for the Pro Micro tester shield:
- Keys arranged to match the Pro Micro pinout, viewed from the front
- Single row of eighteen keys
* Set default revision to 5.20
* update mikoto board defs
* add revision info to mikoto.zmk.yml
* use zephyr aliases to handle mikoto_520
* enable pull-ups for on-board i2c
Renamed the composite kscan's column-offset property to col-offset for
consistency with other properties such as matrix transform's col-offset
and matrix kscan's col-gpios.
* Added matrix transforms and physical layouts for three typical
configurations.
* Tweaked default keymap to be more immediately useful for ZMK and more
closely resemble the default keymaps of non-ZMK firmware.
* Board-specific Kconfig settings migrated to main shield file, so they
will be exposed to end-users through the setup script.
* Tidied formatting and shortened overlong layer labels.
* Aligned encoder configuration with current standards.
* Corrected default number of RGB LEDs.
* Enabled OLED by default in a less authoritarian way.
Add physical layouts and update the keymap for Ladniy's Jiran.
Layouts are added for all three possible transforms:
- Full (with additional pinky key and number row)
- Jian (with additional pinky key), re-uses Jian layout
- 6 column (Corne), re-uses Jian layout
Keymap update includes &studio_unlock.
Add physical layouts and update the keymap for King of Hedgehogs' Jian.
Layouts are added for all three possible transforms:
- Full (with additional pinky key)
- 6 column (Corne)
- 5 column (Minidox)
The layouts are added to be re-usable for the Jiran and other custom boards/shields.
Keymap update includes, small guide clarifications, output selection,
tri-layer and &studio_unlock.
Add physical layouts and update the keymap for Joric's Jorne.
Layouts are added for all three possible transforms:
- Full (with additional pinky key)
- 6 column (Corne), re-uses Corne layout
- 5 column (Minidox), re-uses Corne layout
Keymap update includes quick-tap-ms (essential for this keymap), small
guide clarifications, output selection, tri-layer and &studio_unlock.
Peter Johanson
Andrés Mejía
Aurélien Vallée
Nicolas Munnich
Marius Petcu
snoyer
Joel Spadin
Dimitri Krassovski
FearlessSpiff
Genteure
Allister MacLeod
Alex Rozhkov
yuki
Cem Aksoylar
esplo
ReFil
Nicolas Munnich
Nicolas Munnich
Zack Forbing
honorless
Alexander Krikun